Skip to content

Catalogue of orthotropic wood

Key references: Rossing 2014

Every solid in the solids catalogue is isotropic: one Young’s modulus, one Poisson ratio, and the same answer whichever way a wave runs through it. Wood is not. A spruce plate is thirteen times stiffer along the grain than across it, and an instrument maker chooses the wood precisely for that difference, so a single modulus for it describes no direction at all. These two woods, the ones a stringed instrument is made of, carry the four elastic constants of a thin orthotropic plate: D1 along the grain, D3 across it, D2 the coupling between the two directions and D4 the twisting stiffness. Each is a modulus divided by twelve or a third of the shear modulus rather than a modulus itself, so they do not compare with the fir and spruce in the solids table. The page prints the woods as its columns and this table turns it so that a wood is a row. Two of maple’s constants are the author’s own guesses, which the page marks and the table shows, and maple’s printed scaling factor does not follow from its own row, which is registered in this project’s errata.

Italic is a value this library worked out; a dotted underline is a cell that is not a plain number, and what it is reads on the cell; an asterisk is a note the page made about the row. Click a mark to read it, or give the table focus and press Enter to walk the marks with the arrow keys.

MaterialDensity kg/m³D1, along the grain GPaD2, coupling MPaD3, across the grain MPaD4, twisting MPaRelative scaling factorSource
Spruce4201.167842301.9Rossing (2014) Table 15.5, PDF page 632 (printed p. 622)
Maple Two of this row's four plate constants, D2 and D4, carry the table's asterisk, which the caption explains as “intelligent guesses in the absence of experimental data”: they are the author's estimates and not measurements. They are served, because the page prints them as numbers, but they are marked as estimates so that a caller who wants measurements can tell them apart. The relative scaling factor the page prints for maple, 1.4, does not follow from this row: the same row prints the relation as the fourth root of D1 over D3, and maple's D1 of 860 MPa and D3 of 170 MPa, neither of them asterisked, give 1.50. Spruce's 1.9 does follow from its own row. The factor is served as printed and the defect is registered in docs/ERRATA.md under “Rossing (2014), Table 15.5”.6500.861401702301.4Rossing (2014) Table 15.5, PDF page 632 (printed p. 622)

  • Rossing, T. D. (Ed.). (2014). Springer handbook of acoustics (2nd ed.). Springer. https://doi.org/10.1007/978-1-4939-0755-7 Table 15.5: the source of the rows of the catalogue of orthotropic wood that cite it.