Catalogue of absorption coefficients
Key references: Bies et al. 2017 Long 2014 Cox & D'Antonio 2017 Arau-Puchades 1999 Everest 2001
Each catalogue has a page of its own: choose another one here and open it, or narrow the rows of this one by name and by the table that printed them.
What a finish did in a reverberation room, band by band, as the books print
it. These are not properties of a material but of a specimen, a mounting and
a room, which is why the same carpet is a different number in every book and
why a coefficient above 1 is common and not an error. Bies says of his table
that the values are selected from the literature, that reverberation times
calculated from them are approximate only, and that it is better to use the
manufacturer’s data or to measure. Long says of his that the list is by no
means complete, and prints beside each row the ASTM C423 mounting it was
measured on, because the airspace behind a material changes what it does:
the same fibreglass board laid on the floor and hung over a 400 mm gap is
two rows here, and at 125 Hz it is 0.03 on one and 0.65 on the other. The
rows are held in materials.absorbers.PUBLISHED_ABSORPTION, keyed by the
table they came off, and absorption_named answers with every carpet of
every table rather than choosing one, which for a carpet is twenty-one of
them.
Cox’s appendix is a third kind of table again: a compilation of twenty-nine sources, from Beranek in 1954 to a 2013 paper on the absorption of vegetation, with the source of each row printed beside it. That credit is kept, so a row says which study it came from and two rows of the same name from two studies sit next to each other instead of one of them being dropped.
Everest prints his credits in a column of their own, one source per row, and two rows where the source should be carry a dash instead: those two say nothing rather than borrowing the source above them.
The fourth table is Spanish, and its rows keep their language: Arau’s numbered
list is where moqueta and hormigón come from, and a search for carpet
will not find them. Two of its rows print an interval rather than a value, and
are kept as intervals; one prints a single interval across two columns without
saying which bands it is for, so no band takes it and each says what the page
has there.
Italic is a value this library worked out; a dotted underline is a cell that is not a plain number, and what it is reads on the cell; an asterisk is a note the page made about the row. Click a mark to read it, or give the table focus and press Enter to walk the marks with the arrow keys.
| Finish | Mount | 63 Hz | 125 Hz | 250 Hz | 500 Hz | 1 kHz | 2 kHz | 4 kHz | Source |
|---|---|---|---|---|---|---|---|---|---|
| Concert hall seats Unoccupied – heavily upholstered seats | 0.65 | 0.76 | 0.81 | 0.84 | 0.84 | 0.81 | Bies 5e Table 6.2, PDF pages 367-369 (printed pp. 338-340) | ||
| Concert hall seats Unoccupied – medium upholstered seats | 0.54 | 0.62 | 0.68 | 0.7 | 0.68 | 0.66 | Bies 5e Table 6.2, PDF pages 367-369 (printed pp. 338-340) | ||
| Concert hall seats Unoccupied – light upholstered seats | 0.36 | 0.47 | 0.57 | 0.62 | 0.62 | 0.6 | Bies 5e Table 6.2, PDF pages 367-369 (printed pp. 338-340) | ||
| Concert hall seats Unoccupied – very light upholstered seats | 0.35 | 0.4 | 0.41 | 0.38 | 0.33 | 0.27 | Bies 5e Table 6.2, PDF pages 367-369 (printed pp. 338-340) | ||
| Concert hall seats Unoccupied – average well-upholstered seating areas | 0.28 | 0.44 | 0.6 | 0.77 | 0.84 | 0.82 | 0.7 | Bies 5e Table 6.2, PDF pages 367-369 (printed pp. 338-340) | |
| Concert hall seats Unoccupied – leather-covered upholstered seating areas | 0.4 | 0.5 | 0.58 | 0.61 | 0.58 | 0.5 | Bies 5e Table 6.2, PDF pages 367-369 (printed pp. 338-340) | ||
| Concert hall seats Unoccupied – metal or wood seats | 0.15 | 0.19 | 0.22 | 0.39 | 0.38 | 0.3 | Bies 5e Table 6.2, PDF pages 367-369 (printed pp. 338-340) | ||
| Concert hall seats Unoccupied – concert hall, no seats halls lined with thin wood or other materials <3 cm thick | 0.16 | 0.13 | 0.1 | 0.09 | 0.08 | 0.08 | Bies 5e Table 6.2, PDF pages 367-369 (printed pp. 338-340) | ||
| Concert hall seats Unoccupied – concert hall, no seats Halls lined with heavy materials | 0.12 | 0.1 | 0.08 | 0.08 | 0.08 | 0.08 | Bies 5e Table 6.2, PDF pages 367-369 (printed pp. 338-340) | ||
| Concert hall seats 100% occupied audience (orchestra and chorus areas) – upholstered seats | 0.34 | 0.52 | 0.68 | 0.85 | 0.97 | 0.93 | 0.85 | Bies 5e Table 6.2, PDF pages 367-369 (printed pp. 338-340) | |
| Concert hall seats Wooden pews – 100% occupied | 0.57 | 0.61 | 0.75 | 0.86 | 0.91 | 0.86 | Bies 5e Table 6.2, PDF pages 367-369 (printed pp. 338-340) | ||
| Concert hall seats Wooden chairs – 100% occupied | 0.6 | 0.74 | 0.88 | 0.96 | 0.93 | 0.85 | Bies 5e Table 6.2, PDF pages 367-369 (printed pp. 338-340) | ||
| Concert hall seats Wooden chairs – 75% occupied | 0.46 | 0.56 | 0.65 | 0.75 | 0.72 | 0.65 | Bies 5e Table 6.2, PDF pages 367-369 (printed pp. 338-340) | ||
| Walls Acoustic plaster, 10 mm thick sprayed on solid wall | 0.08 | 0.15 | 0.3 | 0.5 | 0.6 | 0.7 | Bies 5e Table 6.2, PDF pages 367-369 (printed pp. 338-340) | ||
| Walls Hard surfaces (brick walls, plaster, hard floors, etc.) | 0.02 | 0.02 | 0.03 | 0.03 | 0.04 | 0.05 | Bies 5e Table 6.2, PDF pages 367-369 (printed pp. 338-340) | ||
| Walls Gypsum board on 50 × 100 mm studs | 0.29 | 0.1 | 0.05 | 0.04 | 0.07 | 0.09 | Bies 5e Table 6.2, PDF pages 367-369 (printed pp. 338-340) | ||
| Walls Plaster, gypsum or lime, smooth finish on brick | 0.013 | 0.015 | 0.02 | 0.03 | 0.04 | 0.05 | Bies 5e Table 6.2, PDF pages 367-369 (printed pp. 338-340) | ||
| Walls Plaster, gypsum or lime, smooth finish on concrete block | 0.012 | 0.09 | 0.07 | 0.05 | 0.05 | 0.04 | Bies 5e Table 6.2, PDF pages 367-369 (printed pp. 338-340) | ||
| Walls Plaster, gypsum or lime, smooth finish on lath | 0.014 | 0.1 | 0.06 | 0.04 | 0.04 | 0.03 | Bies 5e Table 6.2, PDF pages 367-369 (printed pp. 338-340) | ||
| Walls Solid timber door | 0.14 | 0.1 | 0.06 | 0.08 | 0.1 | 0.1 | Bies 5e Table 6.2, PDF pages 367-369 (printed pp. 338-340) | ||
| Acoustic material Fibreglass or rockwool blanket 16 kg/m³, 25 mm thick | 0.12 | 0.28 | 0.55 | 0.71 | 0.74 | 0.83 | Bies 5e Table 6.2, PDF pages 367-369 (printed pp. 338-340) | ||
| Acoustic material Fibreglass or rockwool blanket 16 kg/m³, 50 mm thick | 0.17 | 0.45 | 0.8 | 0.89 | 0.97 | 0.94 | Bies 5e Table 6.2, PDF pages 367-369 (printed pp. 338-340) | ||
| Acoustic material Fibreglass or rockwool blanket 16 kg/m³, 75 mm thick | 0.3 | 0.69 | 0.94 | 1 | 1 | 1 | Bies 5e Table 6.2, PDF pages 367-369 (printed pp. 338-340) | ||
| Acoustic material Fibreglass or rockwool blanket 16 kg/m³, 100 mm thick | 0.43 | 0.86 | 1 | 1 | 1 | 1 | Bies 5e Table 6.2, PDF pages 367-369 (printed pp. 338-340) | ||
| Acoustic material Fibreglass or rockwool blanket 24 kg/m³, 25 mm thick | 0.11 | 0.32 | 0.56 | 0.77 | 0.89 | 0.91 | Bies 5e Table 6.2, PDF pages 367-369 (printed pp. 338-340) | ||
| Acoustic material Fibreglass or rockwool blanket 24 kg/m³, 50 mm thick | 0.27 | 0.54 | 0.94 | 1 | 1 | 1 | Bies 5e Table 6.2, PDF pages 367-369 (printed pp. 338-340) | ||
| Acoustic material Fibreglass or rockwool blanket 24 kg/m³, 75 mm thick | 0.28 | 0.79 | 1 | 1 | 1 | 1 | Bies 5e Table 6.2, PDF pages 367-369 (printed pp. 338-340) | ||
| Acoustic material Fibreglass or rockwool blanket 24 kg/m³, 100 mm thick | 0.46 | 1 | 1 | 1 | 1 | 1 | Bies 5e Table 6.2, PDF pages 367-369 (printed pp. 338-340) | ||
| Acoustic material Fibreglass or rockwool blanket 48 kg/m³, 50 mm thick | 0.3 | 0.8 | 1 | 1 | 1 | 1 | Bies 5e Table 6.2, PDF pages 367-369 (printed pp. 338-340) | ||
| Acoustic material Fibreglass or rockwool blanket 48 kg/m³, 75 mm thick | 0.43 | 0.97 | 1 | 1 | 1 | 1 | Bies 5e Table 6.2, PDF pages 367-369 (printed pp. 338-340) | ||
| Acoustic material Fibreglass or rockwool blanket 48 kg/m³, 100 mm thick | 0.65 | 1 | 1 | 1 | 1 | 1 | Bies 5e Table 6.2, PDF pages 367-369 (printed pp. 338-340) | ||
| Acoustic material Fibreglass or rockwool blanket 60 kg/m³, 25 mm thick | 0.18 | 0.24 | 0.68 | 0.85 | 1 | 1 | Bies 5e Table 6.2, PDF pages 367-369 (printed pp. 338-340) | ||
| Acoustic material Fibreglass or rockwool blanket 60 kg/m³, 50 mm thick | 0.25 | 0.83 | 1 | 1 | 1 | 1 | Bies 5e Table 6.2, PDF pages 367-369 (printed pp. 338-340) | ||
| Acoustic material Polyurethane foam, 27 kg/m³ 15 mm thick | 0.08 | 0.22 | 0.55 | 0.7 | 0.85 | 0.75 | Bies 5e Table 6.2, PDF pages 367-369 (printed pp. 338-340) | ||
| Floors Wood platform with large space beneath | 0.4 | 0.3 | 0.2 | 0.17 | 0.15 | 0.1 | Bies 5e Table 6.2, PDF pages 367-369 (printed pp. 338-340) | ||
| Floors Wood floor on joists | 0.15 | 0.11 | 0.1 | 0.07 | 0.06 | 0.07 | Bies 5e Table 6.2, PDF pages 367-369 (printed pp. 338-340) | ||
| Floors Concrete or terrazzo | 0.01 | 0.01 | 0.01 | 0.02 | 0.02 | 0.02 | Bies 5e Table 6.2, PDF pages 367-369 (printed pp. 338-340) | ||
| Floors Concrete block painted | 0.01 | 0.05 | 0.06 | 0.07 | 0.09 | 0.08 | Bies 5e Table 6.2, PDF pages 367-369 (printed pp. 338-340) | ||
| Floors Linoleum, asphalt, rubber or cork tile on concrete | 0.02 | 0.03 | 0.03 | 0.03 | 0.03 | 0.02 | Bies 5e Table 6.2, PDF pages 367-369 (printed pp. 338-340) | ||
| Floors Varnished wood joist floor | 0.15 | 0.12 | 0.1 | 0.07 | 0.06 | 0.07 | Bies 5e Table 6.2, PDF pages 367-369 (printed pp. 338-340) | ||
| Floors Carpet, heavy, on concrete | 0.02 | 0.06 | 0.14 | 0.37 | 0.6 | 0.65 | Bies 5e Table 6.2, PDF pages 367-369 (printed pp. 338-340) | ||
| Floors Carpet, heavy, on 1.35 kg/m² hair felt or foam rubber | 0.08 | 0.24 | 0.57 | 0.69 | 0.71 | 0.73 | Bies 5e Table 6.2, PDF pages 367-369 (printed pp. 338-340) | ||
| Floors Carpet, 5 mm thick, on hard floor | 0.02 | 0.03 | 0.05 | 0.1 | 0.3 | 0.5 | Bies 5e Table 6.2, PDF pages 367-369 (printed pp. 338-340) | ||
| Floors Carpet, 6 mm thick, on underlay | 0.03 | 0.09 | 0.2 | 0.54 | 0.7 | 0.72 | Bies 5e Table 6.2, PDF pages 367-369 (printed pp. 338-340) | ||
| Floors Cork floor tiles (3-4 inch thick) – glued down The page prints the thickness as "3-4 inch". A cork floor tile between 75 and 100 mm thick is not a thing, and the classic compilations describe this specimen as three-quarters of an inch, about 19 mm; the name is held as printed and the reading is left to the reader. | 0.08 | 0.02 | 0.08 | 0.19 | 0.21 | 0.22 | Bies 5e Table 6.2, PDF pages 367-369 (printed pp. 338-340) | ||
| Floors Glazed tile/marble | 0.01 | 0.01 | 0.01 | 0.01 | 0.02 | 0.02 | Bies 5e Table 6.2, PDF pages 367-369 (printed pp. 338-340) | ||
| Ceilings 13 mm mineral tile direct fixed to floor slab | 0.1 | 0.25 | 0.7 | 0.85 | 0.7 | 0.6 | Bies 5e Table 6.2, PDF pages 367-369 (printed pp. 338-340) | ||
| Ceilings 13 mm mineral tile suspended 500 mm below ceiling | 0.75 | 0.7 | 0.65 | 0.85 | 0.85 | 0.9 | Bies 5e Table 6.2, PDF pages 367-369 (printed pp. 338-340) | ||
| Curtains Light velour, 338 g/m² hung flat on wall | 0.03 | 0.04 | 0.11 | 0.17 | 0.24 | 0.35 | Bies 5e Table 6.2, PDF pages 367-369 (printed pp. 338-340) | ||
| Curtains Light velour, 338 g/m² hung in folds on wall | 0.05 | 0.15 | 0.35 | 0.4 | 0.5 | 0.5 | Bies 5e Table 6.2, PDF pages 367-369 (printed pp. 338-340) | ||
| Curtains Medium velour, 475 g/m² draped to half area | 0.07 | 0.31 | 0.49 | 0.75 | 0.7 | 0.6 | Bies 5e Table 6.2, PDF pages 367-369 (printed pp. 338-340) | ||
| Curtains Heavy velour, 610 g/m² draped to half area | 0.14 | 0.35 | 0.55 | 0.72 | 0.7 | 0.65 | Bies 5e Table 6.2, PDF pages 367-369 (printed pp. 338-340) | ||
| Glass Glass, heavy plate | 0.18 | 0.06 | 0.04 | 0.03 | 0.02 | 0.02 | Bies 5e Table 6.2, PDF pages 367-369 (printed pp. 338-340) | ||
| Glass Ordinary window | 0.35 | 0.25 | 0.18 | 0.12 | 0.07 | 0.04 | Bies 5e Table 6.2, PDF pages 367-369 (printed pp. 338-340) | ||
| Other Stage openings | 0.3 | 0.4 | 0.5 | 0.6 | 0.6 | 0.5 | Bies 5e Table 6.2, PDF pages 367-369 (printed pp. 338-340) | ||
| Other Water (surface of pool) | 0.01 | 0.01 | 0.01 | 0.015 | 0.02 | 0.03 | Bies 5e Table 6.2, PDF pages 367-369 (printed pp. 338-340) | ||
| Other Orchestra with instruments on podium, 1.5 m² per person | 0.27 | 0.53 | 0.67 | 0.93 | 0.87 | 0.8 | Bies 5e Table 6.2, PDF pages 367-369 (printed pp. 338-340) | ||
| Walls Glass, 1/4″, heavy plate | 0.18 | 0.06 | 0.04 | 0.05 | 0.02 | 0.02 | Long 2e Table 7.1, PDF pages 287-290 (printed pp. 283-286) | ||
| Walls Glass, 3/32″, ordinary window | 0.55 | 0.25 | 0.18 | 0.12 | 0.07 | 0.04 | Long 2e Table 7.1, PDF pages 287-290 (printed pp. 283-286) | ||
| Walls Gypsum board, 1/2″, on 2 × 4 studs | 0.29 | 0.1 | 0.05 | 0.04 | 0.07 | 0.09 | Long 2e Table 7.1, PDF pages 287-290 (printed pp. 283-286) | ||
| Walls Plaster, 7/8″, gypsum or lime, on brick | 0.013 | 0.015 | 0.02 | 0.03 | 0.04 | 0.05 | Long 2e Table 7.1, PDF pages 287-290 (printed pp. 283-286) | ||
| Walls Plaster, on concrete block | 0.12 | 0.09 | 0.07 | 0.05 | 0.05 | 0.04 | Long 2e Table 7.1, PDF pages 287-290 (printed pp. 283-286) | ||
| Walls Plaster, 7/8″, on lath | 0.14 | 0.1 | 0.06 | 0.04 | 0.04 | 0.05 | Long 2e Table 7.1, PDF pages 287-290 (printed pp. 283-286) | ||
| Walls Plaster, 7/8″, lath on studs | 0.3 | 0.15 | 0.1 | 0.05 | 0.04 | 0.05 | Long 2e Table 7.1, PDF pages 287-290 (printed pp. 283-286) | ||
| Walls Plywood, 1/4″, 3″ air space, 1″ batt, | 0.6 | 0.3 | 0.1 | 0.09 | 0.09 | 0.09 | Long 2e Table 7.1, PDF pages 287-290 (printed pp. 283-286) | ||
| Walls Soundblox, type B, painted | 0.74 | 0.37 | 0.45 | 0.35 | 0.36 | 0.34 | Long 2e Table 7.1, PDF pages 287-290 (printed pp. 283-286) | ||
| Walls Wood panel, 3/8″, 3-4″ air space | 0.3 | 0.25 | 0.2 | 0.17 | 0.15 | 0.1 | Long 2e Table 7.1, PDF pages 287-290 (printed pp. 283-286) | ||
| Walls Concrete block, unpainted | 0.36 | 0.44 | 0.51 | 0.29 | 0.39 | 0.25 | Long 2e Table 7.1, PDF pages 287-290 (printed pp. 283-286) | ||
| Walls Concrete block, painted | 0.1 | 0.05 | 0.06 | 0.07 | 0.09 | 0.08 | Long 2e Table 7.1, PDF pages 287-290 (printed pp. 283-286) | ||
| Walls Concrete poured, unpainted | 0.01 | 0.01 | 0.02 | 0.02 | 0.02 | 0.03 | Long 2e Table 7.1, PDF pages 287-290 (printed pp. 283-286) | ||
| Walls Brick, unglazed, unpainted | 0.03 | 0.03 | 0.03 | 0.04 | 0.05 | 0.07 | Long 2e Table 7.1, PDF pages 287-290 (printed pp. 283-286) | ||
| Walls Wood paneling, 1/4″, with airspace behind | 0.42 | 0.21 | 0.1 | 0.08 | 0.06 | 0.06 | Long 2e Table 7.1, PDF pages 287-290 (printed pp. 283-286) | ||
| Walls Wood, paneling, 1″, with airspace behind | 0.19 | 0.14 | 0.09 | 0.06 | 0.06 | 0.05 | Long 2e Table 7.1, PDF pages 287-290 (printed pp. 283-286) | ||
| Walls Shredded-wood fiberboard, 2″, on concrete | A | 0.15 | 0.26 | 0.62 | 0.94 | 0.64 | 0.92 | Long 2e Table 7.1, PDF pages 287-290 (printed pp. 283-286) | |
| Walls Carpet, heavy, on 5/8-in perforated mineral fiberboard | 0.37 | 0.41 | 0.63 | 0.85 | 0.96 | 0.92 | Long 2e Table 7.1, PDF pages 287-290 (printed pp. 283-286) | ||
| Walls Brick, unglazed, painted | A | 0.01 | 0.01 | 0.02 | 0.02 | 0.02 | 0.03 | Long 2e Table 7.1, PDF pages 287-290 (printed pp. 283-286) | |
| Walls Light velour, 10 oz per sq yd, hung straight, in contact with wall | 0.03 | 0.04 | 0.11 | 0.17 | 0.24 | 0.35 | Long 2e Table 7.1, PDF pages 287-290 (printed pp. 283-286) | ||
| Walls Medium velour, 14 oz per sq yd, draped to half area | 0.07 | 0.31 | 0.49 | 0.75 | 0.7 | 0.6 | Long 2e Table 7.1, PDF pages 287-290 (printed pp. 283-286) | ||
| Walls Heavy velour, 18 oz per sq yd, draped to half area | 0.14 | 0.35 | 0.55 | 0.72 | 0.7 | 0.65 | Long 2e Table 7.1, PDF pages 287-290 (printed pp. 283-286) | ||
| Floors Floors, concrete or terrazzo | A | 0.01 | 0.01 | 0.015 | 0.02 | 0.02 | 0.02 | Long 2e Table 7.1, PDF pages 287-290 (printed pp. 283-286) | |
| Floors Floors, linoleum, vinyl on concrete | A | 0.02 | 0.03 | 0.03 | 0.03 | 0.03 | 0.02 | Long 2e Table 7.1, PDF pages 287-290 (printed pp. 283-286) | |
| Floors Floors, linoleum, vinyl on subfloor | 0.02 | 0.04 | 0.05 | 0.05 | 0.1 | 0.05 | Long 2e Table 7.1, PDF pages 287-290 (printed pp. 283-286) | ||
| Floors Floors, wooden | 0.15 | 0.11 | 0.1 | 0.07 | 0.06 | 0.07 | Long 2e Table 7.1, PDF pages 287-290 (printed pp. 283-286) | ||
| Floors Floors, wooden platform w/airspace | 0.4 | 0.3 | 0.2 | 0.17 | 0.15 | 0.1 | Long 2e Table 7.1, PDF pages 287-290 (printed pp. 283-286) | ||
| Floors Carpet, heavy on concrete | A | 0.02 | 0.06 | 0.14 | 0.57 | 0.6 | 0.65 | Long 2e Table 7.1, PDF pages 287-290 (printed pp. 283-286) | |
| Floors Carpet, on 40 oz (1.35 kg / m²) pad | A | 0.08 | 0.24 | 0.57 | 0.69 | 0.71 | 0.73 | Long 2e Table 7.1, PDF pages 287-290 (printed pp. 283-286) | |
| Floors Indoor-outdoor carpet | A | 0.01 | 0.05 | 0.1 | 0.2 | 0.45 | 0.65 | Long 2e Table 7.1, PDF pages 287-290 (printed pp. 283-286) | |
| Floors Wood parquet in asphalt on concrete | A | 0.04 | 0.04 | 0.07 | 0.06 | 0.06 | 0.07 | Long 2e Table 7.1, PDF pages 287-290 (printed pp. 283-286) | |
| Ceilings Acoustical coating K-13 1″ | A | 0.08 | 0.29 | 0.75 | 0.98 | 0.93 | 0.96 | Long 2e Table 7.1, PDF pages 287-290 (printed pp. 283-286) | |
| Ceilings Acoustical coating K-13 1.5″ | A | 0.16 | 0.5 | 0.95 | 1.06 | 1 | 0.97 | Long 2e Table 7.1, PDF pages 287-290 (printed pp. 283-286) | |
| Ceilings Acoustical coating K-13 2″ | A | 0.29 | 0.67 | 1.04 | 1.06 | 1 | 0.97 | Long 2e Table 7.1, PDF pages 287-290 (printed pp. 283-286) | |
| Ceilings Acoustical coating K-13 “fc” 1″ | A | 0.12 | 0.38 | 0.88 | 1.16 | 1.15 | 1.12 | Long 2e Table 7.1, PDF pages 287-290 (printed pp. 283-286) | |
| Ceilings Glass-fiber roof fabric, 12 oz/yd | 0.65 | 0.71 | 0.82 | 0.86 | 0.76 | 0.62 | Long 2e Table 7.1, PDF pages 287-290 (printed pp. 283-286) | ||
| Ceilings Glass-fiber roof fabric, 37.5 oz/yd | 0.38 | 0.23 | 0.17 | 0.15 | 0.09 | 0.06 | Long 2e Table 7.1, PDF pages 287-290 (printed pp. 283-286) | ||
| Acoustical Tile Standard mineral fiber, 5/8″ | E400 | 0.68 | 0.76 | 0.6 | 0.65 | 0.82 | 0.76 | Long 2e Table 7.1, PDF pages 287-290 (printed pp. 283-286) | |
| Acoustical Tile Standard mineral fiber, 3/4″ | E400 | 0.72 | 0.84 | 0.7 | 0.79 | 0.76 | 0.81 | Long 2e Table 7.1, PDF pages 287-290 (printed pp. 283-286) | |
| Acoustical Tile Standard mineral fiber, 1″ | E400 | 0.76 | 0.84 | 0.72 | 0.89 | 0.85 | 0.81 | Long 2e Table 7.1, PDF pages 287-290 (printed pp. 283-286) | |
| Acoustical Tile Energy mineral fiber, 5/8″ | E400 | 0.7 | 0.75 | 0.58 | 0.63 | 0.78 | 0.73 | Long 2e Table 7.1, PDF pages 287-290 (printed pp. 283-286) | |
| Acoustical Tile Energy mineral fiber, 3/4″ | E400 | 0.68 | 0.81 | 0.68 | 0.78 | 0.85 | 0.8 | Long 2e Table 7.1, PDF pages 287-290 (printed pp. 283-286) | |
| Acoustical Tile Energy mineral fiber, 1″ | E400 | 0.74 | 0.85 | 0.68 | 0.86 | 0.9 | 0.79 | Long 2e Table 7.1, PDF pages 287-290 (printed pp. 283-286) | |
| Acoustical Tile Film faced fiberglass, 1″ | E400 | 0.56 | 0.63 | 0.69 | 0.83 | 0.71 | 0.55 | Long 2e Table 7.1, PDF pages 287-290 (printed pp. 283-286) | |
| Acoustical Tile Film faced fiberglass, 2″ | E400 | 0.52 | 0.82 | 0.88 | 0.91 | 0.75 | 0.55 | Long 2e Table 7.1, PDF pages 287-290 (printed pp. 283-286) | |
| Acoustical Tile Film faced fiberglass, 3″ | E400 | 0.64 | 0.88 | 1.02 | 0.91 | 0.84 | 0.62 | Long 2e Table 7.1, PDF pages 287-290 (printed pp. 283-286) | |
| Glass Cloth Acoustical Ceiling Panels Fiberglass tile, 3/4″ | E400 | 0.74 | 0.89 | 0.67 | 0.89 | 0.95 | 1.07 | Long 2e Table 7.1, PDF pages 287-290 (printed pp. 283-286) | |
| Glass Cloth Acoustical Ceiling Panels Fiberglass tile, 1″ | E400 | 0.77 | 0.74 | 0.75 | 0.95 | 1.01 | 1.02 | Long 2e Table 7.1, PDF pages 287-290 (printed pp. 283-286) | |
| Glass Cloth Acoustical Ceiling Panels Fiberglass tile, 1 1/2″ | E400 | 0.78 | 0.93 | 0.88 | 1.01 | 1.02 | 1 | Long 2e Table 7.1, PDF pages 287-290 (printed pp. 283-286) | |
| Seats and Audience Unoccupied well-upholstered seats | 0.19 | 0.37 | 0.56 | 0.67 | 0.61 | 0.59 | Long 2e Table 7.1, PDF pages 287-290 (printed pp. 283-286) | ||
| Seats and Audience Unoccupied leather-covered seats | 0.19 | 0.57 | 0.56 | 0.67 | 0.61 | 0.59 | Long 2e Table 7.1, PDF pages 287-290 (printed pp. 283-286) | ||
| Seats and Audience Wooden pews, occupied | 0.57 | 0.44 | 0.67 | 0.7 | 0.8 | 0.72 | Long 2e Table 7.1, PDF pages 287-290 (printed pp. 283-286) | ||
| Seats and Audience Fabric well-upholstered seats, with perforated seat pans, unoccupied | 0.19 | 0.37 | 0.56 | 0.67 | 0.61 | 0.59 | Long 2e Table 7.1, PDF pages 287-290 (printed pp. 283-286) | ||
| Seats and Audience Leather-covered upholstered seats, unoccupied | 0.44 | 0.54 | 0.6 | 0.62 | 0.58 | 0.5 | Long 2e Table 7.1, PDF pages 287-290 (printed pp. 283-286) | ||
| Seats and Audience Audience, seated in upholstered seats | 0.39 | 0.57 | 0.8 | 0.94 | 0.92 | 0.87 | Long 2e Table 7.1, PDF pages 287-290 (printed pp. 283-286) | ||
| Seats and Audience Congregation, seated in wooden pews | 0.57 | 0.61 | 0.75 | 0.86 | 0.91 | 0.86 | Long 2e Table 7.1, PDF pages 287-290 (printed pp. 283-286) | ||
| Seats and Audience Chair, metal or wood seat, unoccupied | 0.15 | 0.19 | 0.22 | 0.39 | 0.38 | 0.3 | Long 2e Table 7.1, PDF pages 287-290 (printed pp. 283-286) | ||
| Seats and Audience Students, informally dressed, seated in tablet-arm chairs | 0.3 | 0.41 | 0.49 | 0.84 | 0.87 | 0.84 | Long 2e Table 7.1, PDF pages 287-290 (printed pp. 283-286) | ||
| Duct Liners Duct Liners 1/2″ | 0.11 | 0.51 | 0.48 | 0.7 | 0.88 | 0.98 | Long 2e Table 7.1, PDF pages 287-290 (printed pp. 283-286) | ||
| Duct Liners Duct Liners 1″ | 0.16 | 0.54 | 0.67 | 0.85 | 0.97 | 1.01 | Long 2e Table 7.1, PDF pages 287-290 (printed pp. 283-286) | ||
| Duct Liners Duct Liners 1 1/2″ | 0.22 | 0.73 | 0.81 | 0.97 | 1.03 | 1.04 | Long 2e Table 7.1, PDF pages 287-290 (printed pp. 283-286) | ||
| Duct Liners Duct Liners 2″ | 0.33 | 0.9 | 0.96 | 1.07 | 1.07 | 1.09 | Long 2e Table 7.1, PDF pages 287-290 (printed pp. 283-286) | ||
| Duct Liners Aeroflex Type 150, 1″ | F | 0.13 | 0.51 | 0.46 | 0.65 | 0.74 | 0.95 | Long 2e Table 7.1, PDF pages 287-290 (printed pp. 283-286) | |
| Duct Liners Aeroflex Type 150, 2″ | F | 0.25 | 0.73 | 0.94 | 1.03 | 1.02 | 1.09 | Long 2e Table 7.1, PDF pages 287-290 (printed pp. 283-286) | |
| Duct Liners Aeroflex Type 200, 1/2″ | F | 0.1 | 0.44 | 0.29 | 0.39 | 0.63 | 0.81 | Long 2e Table 7.1, PDF pages 287-290 (printed pp. 283-286) | |
| Duct Liners Aeroflex Type 200, 1″ | F | 0.15 | 0.59 | 0.53 | 0.78 | 0.85 | 1 | Long 2e Table 7.1, PDF pages 287-290 (printed pp. 283-286) | |
| Duct Liners Aeroflex Type 200, 2″ | F | 0.28 | 0.81 | 1.04 | 1.1 | 1.06 | 1.09 | Long 2e Table 7.1, PDF pages 287-290 (printed pp. 283-286) | |
| Duct Liners Aeroflex Type 300, 1/2″ | F | 0.09 | 0.43 | 0.31 | 0.43 | 0.66 | 0.98 | Long 2e Table 7.1, PDF pages 287-290 (printed pp. 283-286) | |
| Duct Liners Aeroflex Type 300, 1″ | F | 0.14 | 0.56 | 0.63 | 0.82 | 0.99 | 1.04 | Long 2e Table 7.1, PDF pages 287-290 (printed pp. 283-286) | |
| Duct Liners Aeroflex Type 150, 1″ | A | 0.06 | 0.24 | 0.47 | 0.71 | 0.85 | 0.97 | Long 2e Table 7.1, PDF pages 287-290 (printed pp. 283-286) | |
| Duct Liners Aeroflex Type 150, 2″ | A | 0.2 | 0.51 | 0.88 | 1.02 | 0.99 | 1.04 | Long 2e Table 7.1, PDF pages 287-290 (printed pp. 283-286) | |
| Duct Liners Aeroflex Type 300, 1″ | A | 0.08 | 0.28 | 0.65 | 0.89 | 1.01 | 1.04 | Long 2e Table 7.1, PDF pages 287-290 (printed pp. 283-286) | |
| Building Insulation - Fiberglass Building Insulation - Fiberglass 3.5″ (R-11) (insulation exposed to sound) | A | 0.34 | 0.85 | 1.09 | 0.97 | 0.97 | 1.12 | Long 2e Table 7.1, PDF pages 287-290 (printed pp. 283-286) | |
| Building Insulation - Fiberglass Building Insulation - Fiberglass 6.0″ (R-19) (insulation exposed to sound) | A | 0.64 | 1.14 | 1.09 | 0.99 | 1 | 1.21 | Long 2e Table 7.1, PDF pages 287-290 (printed pp. 283-286) | |
| Building Insulation - Fiberglass Building Insulation - Fiberglass 3.5″ (R-11) (FRK facing exposed to sound) | A | 0.56 | 1.11 | 1.16 | 0.61 | 0.4 | 0.21 | Long 2e Table 7.1, PDF pages 287-290 (printed pp. 283-286) | |
| Building Insulation - Fiberglass Building Insulation - Fiberglass 6.0″ (R-19) (FRK facing exposed to sound) | A | 0.94 | 1.33 | 1.02 | 0.71 | 0.56 | 0.39 | Long 2e Table 7.1, PDF pages 287-290 (printed pp. 283-286) | |
| Fiberglass Board (FB) FB, 3lb/ft³, 1″ thick | A | 0.03 | 0.22 | 0.69 | 0.91 | 0.96 | 0.99 | Long 2e Table 7.1, PDF pages 287-290 (printed pp. 283-286) | |
| Fiberglass Board (FB) FB, 3lb/ft³, 2″ thick | A | 0.22 | 0.82 | 1.21 | 1.1 | 1.02 | 1.05 | Long 2e Table 7.1, PDF pages 287-290 (printed pp. 283-286) | |
| Fiberglass Board (FB) FB, 3lb/ft³, 3″ thick | A | 0.53 | 1.19 | 1.21 | 1.08 | 1.01 | 1.04 | Long 2e Table 7.1, PDF pages 287-290 (printed pp. 283-286) | |
| Fiberglass Board (FB) FB, 3lb/ft³, 4″ thick | A | 0.84 | 1.24 | 1.24 | 1.08 | 1 | 0.97 | Long 2e Table 7.1, PDF pages 287-290 (printed pp. 283-286) | |
| Fiberglass Board (FB) FB, 3lb/ft³, 1″ thick | E400 | 0.65 | 0.94 | 0.76 | 0.98 | 1 | 1.14 | Long 2e Table 7.1, PDF pages 287-290 (printed pp. 283-286) | |
| Fiberglass Board (FB) FB, 3lb/ft³, 2″ thick | E400 | 0.66 | 0.95 | 1.06 | 1.11 | 1.09 | 1.18 | Long 2e Table 7.1, PDF pages 287-290 (printed pp. 283-286) | |
| Fiberglass Board (FB) FB, 3lb/ft³, 3″ thick | E400 | 0.66 | 0.93 | 1.13 | 1.1 | 1.11 | 1.14 | Long 2e Table 7.1, PDF pages 287-290 (printed pp. 283-286) | |
| Fiberglass Board (FB) FB, 3lb/ft³, 4″ thick | E400 | 0.65 | 1.01 | 1.2 | 1.14 | 1.1 | 1.16 | Long 2e Table 7.1, PDF pages 287-290 (printed pp. 283-286) | |
| Fiberglass Board (FB) FB, 6lb/ft³, 1″ thick | A | 0.08 | 0.25 | 0.74 | 0.95 | 0.97 | 1 | Long 2e Table 7.1, PDF pages 287-290 (printed pp. 283-286) | |
| Fiberglass Board (FB) FB, 6lb/ft³, 2″ thick | A | 0.19 | 0.74 | 1.17 | 1.11 | 1.01 | 1.01 | Long 2e Table 7.1, PDF pages 287-290 (printed pp. 283-286) | |
| Fiberglass Board (FB) FB, 6lb/ft³, 3″ thick | A | 0.54 | 1.12 | 1.23 | 1.07 | 1.01 | 1.05 | Long 2e Table 7.1, PDF pages 287-290 (printed pp. 283-286) | |
| Fiberglass Board (FB) FB, 6lb/ft³, 4″ thick | A | 0.75 | 1.19 | 1.17 | 1.05 | 0.97 | 0.98 | Long 2e Table 7.1, PDF pages 287-290 (printed pp. 283-286) | |
| Fiberglass Board (FB) FB, 6lb/ft³, 1″ thick | E400 | 0.68 | 0.91 | 0.78 | 0.97 | 1.05 | 1.18 | Long 2e Table 7.1, PDF pages 287-290 (printed pp. 283-286) | |
| Fiberglass Board (FB) FB, 6lb/ft³, 2″ thick | E400 | 0.62 | 0.95 | 0.98 | 1.07 | 1.09 | 1.22 | Long 2e Table 7.1, PDF pages 287-290 (printed pp. 283-286) | |
| Fiberglass Board (FB) FB, 6lb/ft³, 3″ thick | E400 | 0.66 | 0.92 | 1.11 | 1.12 | 1.1 | 1.19 | Long 2e Table 7.1, PDF pages 287-290 (printed pp. 283-286) | |
| Fiberglass Board (FB) FB, 6lb/ft³, 4″ thick | E400 | 0.59 | 0.91 | 1.15 | 1.11 | 1.11 | 1.19 | Long 2e Table 7.1, PDF pages 287-290 (printed pp. 283-286) | |
| Fiberglass Board (FB) FB, FRK faced, 1″ thick | A | 0.12 | 0.74 | 0.72 | 0.68 | 0.53 | 0.24 | Long 2e Table 7.1, PDF pages 287-290 (printed pp. 283-286) | |
| Fiberglass Board (FB) FB, FRK faced, 2″ thick | A | 0.51 | 0.65 | 0.86 | 0.71 | 0.49 | 0.26 | Long 2e Table 7.1, PDF pages 287-290 (printed pp. 283-286) | |
| Fiberglass Board (FB) FB, FRK faced, 3″ thick | A | 0.84 | 0.88 | 0.86 | 0.71 | 0.52 | 0.25 | Long 2e Table 7.1, PDF pages 287-290 (printed pp. 283-286) | |
| Fiberglass Board (FB) FB, FRK faced, 4″ thick | A | 0.88 | 0.9 | 0.84 | 0.71 | 0.49 | 0.23 | Long 2e Table 7.1, PDF pages 287-290 (printed pp. 283-286) | |
| Fiberglass Board (FB) FB, FRK faced, 1″ thick | E400 | 0.48 | 0.6 | 0.8 | 0.82 | 0.52 | 0.35 | Long 2e Table 7.1, PDF pages 287-290 (printed pp. 283-286) | |
| Fiberglass Board (FB) FB, FRK faced, 2″ thick | E400 | 0.5 | 0.61 | 0.99 | 0.83 | 0.51 | 0.35 | Long 2e Table 7.1, PDF pages 287-290 (printed pp. 283-286) | |
| Fiberglass Board (FB) FB, FRK faced, 3″ thick | E400 | 0.59 | 0.64 | 1.09 | 0.81 | 0.5 | 0.33 | Long 2e Table 7.1, PDF pages 287-290 (printed pp. 283-286) | |
| Fiberglass Board (FB) FB, FRK faced, 4″ thick | E400 | 0.61 | 0.69 | 1.08 | 0.81 | 0.48 | 0.34 | Long 2e Table 7.1, PDF pages 287-290 (printed pp. 283-286) | |
| Curtains or drapes Light velour 0.338 kg/m² hung straight in contact with wall | 0.04 | 0.05 | 0.11 | 0.18 | 0.3 | 0.35 | Cox & D'Antonio 3e Appendix A, PDF pages 532-536 (printed pp. 475-479) | ||
| Curtains or drapes Medium velour 0.475 kg/m², hung straight | 0.05 | 0.07 | 0.13 | 0.22 | 0.32 | 0.35 | Cox & D'Antonio 3e Appendix A, PDF pages 532-536 (printed pp. 475-479) | ||
| Curtains or drapes Medium velour 0.475 kg/m², draped to half area | 0.07 | 0.31 | 0.49 | 0.75 | 0.7 | 0.6 | Cox & D'Antonio 3e Appendix A, PDF pages 532-536 (printed pp. 475-479) | ||
| Curtains or drapes Heavy velour, 0.61 kg/m² hung straight | 0.05 | 0.12 | 0.35 | 0.48 | 0.38 | 0.36 | Cox & D'Antonio 3e Appendix A, PDF pages 532-536 (printed pp. 475-479) | ||
| Curtains or drapes Heavy velour, 0.61 kg/m² draped to half area | 0.14 | 0.35 | 0.55 | 0.77 | 0.7 | 0.6 | Cox & D'Antonio 3e Appendix A, PDF pages 532-536 (printed pp. 475-479) | ||
| Variation with draping Variation with draping Hung straight | 0.04 | 0.16 | 0.19 | 0.17 | 0.2 | 0.25 | Cox & D'Antonio 3e Appendix A, PDF pages 532-536 (printed pp. 475-479) | ||
| Variation with draping Variation with draping Draped to half area | 0.15 | 0.25 | 0.3 | 0.28 | 0.35 | 0.4 | Cox & D'Antonio 3e Appendix A, PDF pages 532-536 (printed pp. 475-479) | ||
| Variation with draping Variation with draping Draped to 40% of area | 0.19 | 0.31 | 0.35 | 0.34 | 0.44 | 0.5 | Cox & D'Antonio 3e Appendix A, PDF pages 532-536 (printed pp. 475-479) | ||
| Variation with draping Variation with draping Curtains in folds against wall | 0.05 | 0.15 | 0.35 | 0.4 | 0.5 | 0.5 | Cox & D'Antonio 3e Appendix A, PDF pages 532-536 (printed pp. 475-479) | ||
| Cotton curtains, 0.475 kg/m² Cotton curtains, 0.475 kg/m² Draped to 7/8 area | 0.03 | 0.12 | 0.15 | 0.27 | 0.37 | 0.42 | Cox & D'Antonio 3e Appendix A, PDF pages 532-536 (printed pp. 475-479) | ||
| Cotton curtains, 0.475 kg/m² Cotton curtains, 0.475 kg/m² Draped to 3/4 area | 0.04 | 0.23 | 0.4 | 0.57 | 0.53 | 0.4 | Cox & D'Antonio 3e Appendix A, PDF pages 532-536 (printed pp. 475-479) | ||
| Cotton curtains, 0.475 kg/m² Cotton curtains, 0.475 kg/m² Draped to 1/2 area | 0.07 | 0.37 | 0.49 | 0.81 | 0.65 | 0.54 | Cox & D'Antonio 3e Appendix A, PDF pages 532-536 (printed pp. 475-479) | ||
| Carpet Carpet heavy, on concrete | 0.02 | 0.06 | 0.14 | 0.37 | 0.6 | 0.65 | Cox & D'Antonio 3e Appendix A, PDF pages 532-536 (printed pp. 475-479) | ||
| Carpet Heavy carpet (same as line above) on foam rubber or 1.35 kg/m² hair felt | 0.08 | 0.24 | 0.57 | 0.69 | 0.71 | 0.73 | Cox & D'Antonio 3e Appendix A, PDF pages 532-536 (printed pp. 475-479) | ||
| Carpet Heavy carpet (same as 2 lines above) with latex backing on foam rubber or 1.35 kg/m² hair felt | 0.08 | 0.27 | 0.39 | 0.34 | 0.48 | 0.63 | Cox & D'Antonio 3e Appendix A, PDF pages 532-536 (printed pp. 475-479) | ||
| Carpet Haircord on felt | 0.1 | 0.15 | 0.25 | 0.3 | 0.3 | 0.3 | Cox & D'Antonio 3e Appendix A, PDF pages 532-536 (printed pp. 475-479) | ||
| Carpet Pile and thick felt | 0.07 | 0.25 | 0.5 | 0.5 | 0.6 | 0.65 | Cox & D'Antonio 3e Appendix A, PDF pages 532-536 (printed pp. 475-479) | ||
| Carpet No underlay (pad), woven wool loop, 1.2 kg/m² 2.4 mm pile height | 0.1 | 0.16 | 0.11 | 0.3 | 0.5 | 0.47 | Cox & D'Antonio 3e Appendix A, PDF pages 532-536 (printed pp. 475-479) | ||
| Carpet No underlay (pad), woven wool loop, 1.4 kg/m² 6.4 mm pile height | 0.15 | 0.17 | 0.12 | 0.32 | 0.52 | 0.57 | Cox & D'Antonio 3e Appendix A, PDF pages 532-536 (printed pp. 475-479) | ||
| Carpet No underlay (pad) woven wool loop, 2.3 kg/m² 9.5 mm pile height | 0.17 | 0.18 | 0.21 | 0.5 | 0.63 | 0.83 | Cox & D'Antonio 3e Appendix A, PDF pages 532-536 (printed pp. 475-479) | ||
| Carpet Loop pile tufted carpet, 1.4 kg/m², hair underlay 1.4 kg/m² | 0.03 | 0.25 | 0.55 | 0.7 | 0.62 | 0.84 | Cox & D'Antonio 3e Appendix A, PDF pages 532-536 (printed pp. 475-479) | ||
| Carpet Loop pile tufted carpet, 1.4 kg/m², hair underlay 3.0 kg/m² | 0.1 | 0.4 | 0.62 | 0.7 | 0.63 | 0.88 | Cox & D'Antonio 3e Appendix A, PDF pages 532-536 (printed pp. 475-479) | ||
| Carpet Loop pile tufted carpet, 1.4 kg/m², hair and jute underlay 3 kg/m² | 0.2 | 0.5 | 0.68 | 0.72 | 0.65 | 0.9 | Cox & D'Antonio 3e Appendix A, PDF pages 532-536 (printed pp. 475-479) | ||
| Carpet Loop pile tufted carpet, 1.4 kg/m², no underlay | 0.04 | 0.08 | 0.17 | 0.33 | 0.59 | 0.75 | Cox & D'Antonio 3e Appendix A, PDF pages 532-536 (printed pp. 475-479) | ||
| Carpet Loop pile tufted carpet, 0.7 kg/m², 1.4 kg/m² hair underlay pad | 0.1 | 0.19 | 0.35 | 0.79 | 0.69 | 0.79 | Cox & D'Antonio 3e Appendix A, PDF pages 532-536 (printed pp. 475-479) | ||
| Carpet 16 mm wool pile with underlay | 0.2 | 0.25 | 0.35 | 0.4 | 0.5 | 0.75 | Cox & D'Antonio 3e Appendix A, PDF pages 532-536 (printed pp. 475-479) | ||
| Carpet 9.5 mm wool pile no underlay on concrete | 0.09 | 0.08 | 0.21 | 0.26 | 0.27 | 0.37 | Cox & D'Antonio 3e Appendix A, PDF pages 532-536 (printed pp. 475-479) | ||
| Carpet Cord carpet | 0.05 | 0.05 | 0.1 | 0.2 | 0.45 | 0.65 | Cox & D'Antonio 3e Appendix A, PDF pages 532-536 (printed pp. 475-479) | ||
| Carpet Thin (6 mm) carpet on underlay | 0.03 | 0.09 | 0.2 | 0.54 | 0.7 | 0.72 | Cox & D'Antonio 3e Appendix A, PDF pages 532-536 (printed pp. 475-479) | ||
| Carpet 6 mm pile carpet bonded to closed-cell foam underlay | 0.03 | 0.09 | 0.25 | 0.31 | 0.33 | 0.44 | Cox & D'Antonio 3e Appendix A, PDF pages 532-536 (printed pp. 475-479) | ||
| Carpet Thick (9 mm) carpet on underlay | 0.08 | 0.08 | 0.3 | 0.6 | 0.75 | 0.8 | Cox & D'Antonio 3e Appendix A, PDF pages 532-536 (printed pp. 475-479) | ||
| Carpet Needle felt 5 mm stuck to concrete | 0.01 | 0.02 | 0.05 | 0.15 | 0.3 | 0.4 | Cox & D'Antonio 3e Appendix A, PDF pages 532-536 (printed pp. 475-479) | ||
| Carpet Thin carpet cemented to concrete | 0.02 | 0.04 | 0.08 | 0.2 | 0.35 | 0.4 | Cox & D'Antonio 3e Appendix A, PDF pages 532-536 (printed pp. 475-479) | ||
| Other floors Wood block/lino/rubber flooring | 0.02 | 0.04 | 0.05 | 0.05 | 0.1 | 0.05 | Cox & D'Antonio 3e Appendix A, PDF pages 532-536 (printed pp. 475-479) | ||
| Other floors Parquet fixed with asphalt, on concrete | 0.04 | 0.04 | 0.07 | 0.06 | 0.06 | 0.07 | Cox & D'Antonio 3e Appendix A, PDF pages 532-536 (printed pp. 475-479) | ||
| Other floors Wood on solid floor | 0.04 | 0.04 | 0.03 | 0.03 | 0.03 | 0.02 | Cox & D'Antonio 3e Appendix A, PDF pages 532-536 (printed pp. 475-479) | ||
| Other floors Floors, wood | 0.15 | 0.11 | 0.1 | 0.07 | 0.06 | 0.07 | Cox & D'Antonio 3e Appendix A, PDF pages 532-536 (printed pp. 475-479) | ||
| Other floors Wood platform, large airspace below | 0.4 | 0.3 | 0.2 | 0.17 | 0.15 | 0.1 | Cox & D'Antonio 3e Appendix A, PDF pages 532-536 (printed pp. 475-479) | ||
| Other floors Floor boards on joist floor | 0.15 | 0.2 | 0.1 | 0.1 | 0.1 | 0.1 | Cox & D'Antonio 3e Appendix A, PDF pages 532-536 (printed pp. 475-479) | ||
| Other floors Floors, concrete or terrazzo | 0.01 | 0.01 | 0.015 | 0.02 | 0.02 | 0.02 | Cox & D'Antonio 3e Appendix A, PDF pages 532-536 (printed pp. 475-479) | ||
| Other floors Concrete floor | 0.01 | 0.02 | 0.02 | 0.02 | 0.02 | 0.02 | Cox & D'Antonio 3e Appendix A, PDF pages 532-536 (printed pp. 475-479) | ||
| Other floors Linoleum or vinyl stuck to concrete | 0.02 | 0.02 | 0.03 | 0.04 | 0.04 | 0.05 | Cox & D'Antonio 3e Appendix A, PDF pages 532-536 (printed pp. 475-479) | ||
| Other floors Linoleum, asphalt tile, or cork tile on concrete | 0.02 | 0.03 | 0.03 | 0.03 | 0.03 | 0.02 | Cox & D'Antonio 3e Appendix A, PDF pages 532-536 (printed pp. 475-479) | ||
| Other floors Layer of rubber, cork, linoleum and underlay, or vinyl and underlay, stuck to concrete | 0.02 | 0.02 | 0.04 | 0.05 | 0.05 | 0.1 | Cox & D'Antonio 3e Appendix A, PDF pages 532-536 (printed pp. 475-479) | ||
| Other floors Cork, lino or rubber tile on solid floor | 0.04 | 0.03 | 0.04 | 0.04 | 0.03 | 0.02 | Cox & D'Antonio 3e Appendix A, PDF pages 532-536 (printed pp. 475-479) | ||
| Other floors 25 mm cork on solid backing | 0.05 | 0.1 | 0.2 | 0.55 | 0.6 | 0.55 | Cox & D'Antonio 3e Appendix A, PDF pages 532-536 (printed pp. 475-479) | ||
| Other floors Slate | 0.01 | 0.01 | 0.01 | 0.02 | 0.02 | 0.02 | Cox & D'Antonio 3e Appendix A, PDF pages 532-536 (printed pp. 475-479) | ||
| Theatre seating, unoccupied Beranek's values | 0.19 | 0.37 | 0.56 | 0.67 | 0.61 | 0.59 | Cox & D'Antonio 3e Appendix A, PDF pages 532-536 (printed pp. 475-479) | ||
| Theatre seating, unoccupied Average of nine modern seating designs, 0.9 m row spacing | 0.34 | 0.46 | 0.64 | 0.71 | 0.77 | 0.85 | Cox & D'Antonio 3e Appendix A, PDF pages 532-536 (printed pp. 475-479) | ||
| Theatre seating, unoccupied One seat type, 0.8 m row spacing | 0.29 | 0.39 | 0.61 | 0.74 | 0.83 | 0.88 | Cox & D'Antonio 3e Appendix A, PDF pages 532-536 (printed pp. 475-479) | ||
| Theatre seating, unoccupied Same seat as line above, 0.9 m row spacing | 0.25 | 0.35 | 0.58 | 0.7 | 0.78 | 0.84 | Cox & D'Antonio 3e Appendix A, PDF pages 532-536 (printed pp. 475-479) | ||
| Theatre seating, unoccupied Same seat as two lines above, 1 m row spacing | 0.23 | 0.34 | 0.52 | 0.65 | 0.73 | 0.75 | Cox & D'Antonio 3e Appendix A, PDF pages 532-536 (printed pp. 475-479) | ||
| Theatre seating, unoccupied Upholstered seating | 0.45 | 0.6 | 0.73 | 0.8 | 0.75 | 0.64 | Cox & D'Antonio 3e Appendix A, PDF pages 532-536 (printed pp. 475-479) | ||
| Theatre seating, unoccupied Upholstered seating, well upholstered | 0.44 | 0.6 | 0.77 | 0.89 | 0.82 | 0.7 | Cox & D'Antonio 3e Appendix A, PDF pages 532-536 (printed pp. 475-479) | ||
| Theatre seating, unoccupied Upholstered seating, leather covered | 0.4 | 0.5 | 0.58 | 0.61 | 0.58 | 0.5 | Cox & D'Antonio 3e Appendix A, PDF pages 532-536 (printed pp. 475-479) | ||
| Seating, occupied Occupied theatre seating average from References 1 and 16 | 0.41 | 0.58 | 0.8 | 0.9 | 0.92 | 0.89 | Cox & D'Antonio 3e Appendix A, PDF pages 532-536 (printed pp. 475-479) | ||
| Seating, occupied Audience on timber seats (1/m²) | 0.16 | 0.24 | 0.56 | 0.69 | 0.81 | 0.78 | Cox & D'Antonio 3e Appendix A, PDF pages 532-536 (printed pp. 475-479) | ||
| Seating, occupied Audience on timber seats (2/m²) | 0.24 | 0.4 | 0.78 | 0.98 | 0.96 | 0.87 | Cox & D'Antonio 3e Appendix A, PDF pages 532-536 (printed pp. 475-479) | ||
| Seating, occupied Orchestra with instruments (1.5 m²/person) | 0.27 | 0.53 | 0.67 | 0.93 | 0.87 | 0.8 | Cox & D'Antonio 3e Appendix A, PDF pages 532-536 (printed pp. 475-479) | ||
| Seating, occupied Wooden pews (100% occupancy) | 0.57 | 0.61 | 0.75 | 0.86 | 0.91 | 0.86 | Cox & D'Antonio 3e Appendix A, PDF pages 532-536 (printed pp. 475-479) | ||
| Seating, occupied Wooden chairs (100% occupancy) | 0.6 | 0.74 | 0.88 | 0.96 | 0.93 | 0.85 | Cox & D'Antonio 3e Appendix A, PDF pages 532-536 (printed pp. 475-479) | ||
| Seating, occupied Wooden pews (75% occupancy) | 0.46 | 0.56 | 0.65 | 0.75 | 0.72 | 0.65 | Cox & D'Antonio 3e Appendix A, PDF pages 532-536 (printed pp. 475-479) | ||
| Standing audience 2.7 people/m² (see Reference 18) | 0.23 | 0.46 | 0.95 | 1.21 | 1.2 | 1.14 | Cox & D'Antonio 3e Appendix A, PDF pages 532-536 (printed pp. 475-479) | ||
| Miscellaneous Water surface in swimming pool | 0.01 | 0.01 | 0.01 | 0.01 | 0.02 | 0.02 | Cox & D'Antonio 3e Appendix A, PDF pages 532-536 (printed pp. 475-479) | ||
| Miscellaneous Water surface in swimming pool | 0.008 | 0.008 | 0.013 | 0.015 | 0.02 | 0.025 | Cox & D'Antonio 3e Appendix A, PDF pages 532-536 (printed pp. 475-479) | ||
| Miscellaneous Marble or glazed tile | 0.01 | 0.01 | 0.01 | 0.01 | 0.02 | 0.02 | Cox & D'Antonio 3e Appendix A, PDF pages 532-536 (printed pp. 475-479) | ||
| Miscellaneous Solid wooden door | 0.14 | 0.1 | 0.06 | 0.08 | 0.1 | 0.1 | Cox & D'Antonio 3e Appendix A, PDF pages 532-536 (printed pp. 475-479) | ||
| Miscellaneous Ventilation grille | 0.6 | 0.6 | 0.6 | 0.6 | 0.6 | 0.6 | Cox & D'Antonio 3e Appendix A, PDF pages 532-536 (printed pp. 475-479) | ||
| Miscellaneous Egg boxes | 0.01 | 0.07 | 0.43 | 0.62 | 0.51 | 0.7 | Cox & D'Antonio 3e Appendix A, PDF pages 532-536 (printed pp. 475-479) | ||
| Miscellaneous Anechoic chamber wall (wedges) | 0.997 | 0.997 | 0.997 | 0.997 | 0.997 | 0.997 | Cox & D'Antonio 3e Appendix A, PDF pages 532-536 (printed pp. 475-479) | ||
| Wood Plywood panelling, 1 cm thick | 0.28 | 0.22 | 0.17 | 0.09 | 0.1 | 0.11 | Cox & D'Antonio 3e Appendix A, PDF pages 532-536 (printed pp. 475-479) | ||
| Wood 22 mm chipboard, 50 mm cavity filled with mineral wool | 0.12 | 0.04 | 0.06 | 0.05 | 0.05 | 0.05 | Cox & D'Antonio 3e Appendix A, PDF pages 532-536 (printed pp. 475-479) | ||
| Wood 3–4 mm plywood sheets, >75 mm cavity with 25–50 mm mineral wool | 0.5 | 0.3 | 0.1 | 0.05 | 0.05 | 0.05 | Cox & D'Antonio 3e Appendix A, PDF pages 532-536 (printed pp. 475-479) | ||
| Wood Plywood/hardwood, air space | 0.32 | 0.43 | 0.12 | 0.07 | 0.07 | 0.11 | Cox & D'Antonio 3e Appendix A, PDF pages 532-536 (printed pp. 475-479) | ||
| Wood 6 mm wood fibreboard on laths, cavity >100 mm deep | 0.3 | 0.2 | 0.2 | 0.1 | 0.05 | 0.05 | Cox & D'Antonio 3e Appendix A, PDF pages 532-536 (printed pp. 475-479) | ||
| Wood Fibreboard, solid backing | 0.05 | 0.1 | 0.15 | 0.25 | 0.3 | 0.3 | Cox & D'Antonio 3e Appendix A, PDF pages 532-536 (printed pp. 475-479) | ||
| Wood Fibreboard, 25 mm air space | 0.3 | 0.3 | 0.3 | 0.3 | 0.3 | 0.3 | Cox & D'Antonio 3e Appendix A, PDF pages 532-536 (printed pp. 475-479) | ||
| Wood 9.5–12.7 mm wood panelling, 5–10 cm air space behind | 0.3 | 0.25 | 0.2 | 0.17 | 0.15 | 0.1 | Cox & D'Antonio 3e Appendix A, PDF pages 532-536 (printed pp. 475-479) | ||
| Wood Wood, 50 mm thick | 0.01 | 0.05 | 0.05 | 0.04 | 0.04 | 0.04 | Cox & D'Antonio 3e Appendix A, PDF pages 532-536 (printed pp. 475-479) | ||
| Concrete Rough concrete | 0.02 | 0.03 | 0.03 | 0.03 | 0.04 | 0.07 | Cox & D'Antonio 3e Appendix A, PDF pages 532-536 (printed pp. 475-479) | ||
| Concrete Smooth unpainted concrete | 0.01 | 0.01 | 0.02 | 0.02 | 0.02 | 0.05 | Cox & D'Antonio 3e Appendix A, PDF pages 532-536 (printed pp. 475-479) | ||
| Concrete Smooth concrete, painted or glazed | 0.01 | 0.01 | 0.01 | 0.02 | 0.02 | 0.02 | Cox & D'Antonio 3e Appendix A, PDF pages 532-536 (printed pp. 475-479) | ||
| Concrete Concrete block, coarse | 0.36 | 0.44 | 0.31 | 0.29 | 0.39 | 0.25 | Cox & D'Antonio 3e Appendix A, PDF pages 532-536 (printed pp. 475-479) | ||
| Concrete Concrete block, painted | 0.1 | 0.05 | 0.06 | 0.07 | 0.09 | 0.08 | Cox & D'Antonio 3e Appendix A, PDF pages 532-536 (printed pp. 475-479) | ||
| Concrete Porous concrete blocks without surface finish, 400–800 kg/m³ | 0.05 | 0.05 | 0.05 | 0.08 | 0.14 | 0.2 | Cox & D'Antonio 3e Appendix A, PDF pages 532-536 (printed pp. 475-479) | ||
| Concrete Clinker concrete, no surface finish, 800 kg/m³ | 0.1 | 0.2 | 0.4 | 0.6 | 0.5 | 0.6 | Cox & D'Antonio 3e Appendix A, PDF pages 532-536 (printed pp. 475-479) | ||
| Bricks and blocks Brick, unglazed | 0.03 | 0.03 | 0.03 | 0.04 | 0.05 | 0.07 | Cox & D'Antonio 3e Appendix A, PDF pages 532-536 (printed pp. 475-479) | ||
| Bricks and blocks Brickwork, plain painted | 0.05 | 0.04 | 0.02 | 0.04 | 0.05 | 0.05 | Cox & D'Antonio 3e Appendix A, PDF pages 532-536 (printed pp. 475-479) | ||
| Bricks and blocks Smooth brickwork with flush pointing, painted | 0.01 | 0.01 | 0.02 | 0.02 | 0.02 | 0.02 | Cox & D'Antonio 3e Appendix A, PDF pages 532-536 (printed pp. 475-479) | ||
| Bricks and blocks Brick, unglazed, painted | 0.01 | 0.01 | 0.02 | 0.02 | 0.02 | 0.03 | Cox & D'Antonio 3e Appendix A, PDF pages 532-536 (printed pp. 475-479) | ||
| Bricks and blocks Smooth brickwork with flush pointing | 0.02 | 0.03 | 0.03 | 0.04 | 0.05 | 0.07 | Cox & D'Antonio 3e Appendix A, PDF pages 532-536 (printed pp. 475-479) | ||
| Bricks and blocks Smooth brickwork, 10 mm deep pointing, pit sand mortar | 0.08 | 0.09 | 0.12 | 0.16 | 0.22 | 0.24 | Cox & D'Antonio 3e Appendix A, PDF pages 532-536 (printed pp. 475-479) | ||
| Bricks and blocks Breeze block | 0.2 | 0.3 | 0.6 | 0.6 | 0.5 | 0.5 | Cox & D'Antonio 3e Appendix A, PDF pages 532-536 (printed pp. 475-479) | ||
| Plaster Lime cement plaster | 0.02 | 0.02 | 0.03 | 0.04 | 0.05 | 0.05 | Cox & D'Antonio 3e Appendix A, PDF pages 532-536 (printed pp. 475-479) | ||
| Plaster Glaze plaster | 0.01 | 0.01 | 0.01 | 0.02 | 0.02 | 0.02 | Cox & D'Antonio 3e Appendix A, PDF pages 532-536 (printed pp. 475-479) | ||
| Plaster Painted plaster surface | 0.02 | 0.02 | 0.02 | 0.02 | 0.02 | 0.02 | Cox & D'Antonio 3e Appendix A, PDF pages 532-536 (printed pp. 475-479) | ||
| Plaster Plaster with wallpaper on backing paper | 0.02 | 0.03 | 0.04 | 0.05 | 0.07 | 0.08 | Cox & D'Antonio 3e Appendix A, PDF pages 532-536 (printed pp. 475-479) | ||
| Plaster Plaster, gypsum, or lime, rough finish on lath | 0.02 | 0.03 | 0.04 | 0.05 | 0.04 | 0.03 | Cox & D'Antonio 3e Appendix A, PDF pages 532-536 (printed pp. 475-479) | ||
| Plaster Plaster, gypsum, or lime, smooth finish on lath | 0.14 | 0.1 | 0.06 | 0.04 | 0.04 | 0.03 | Cox & D'Antonio 3e Appendix A, PDF pages 532-536 (printed pp. 475-479) | ||
| Plaster Plaster, gypsum, or lime, smooth finish on lath | 0.02 | 0.02 | 0.03 | 0.04 | 0.04 | 0.03 | Cox & D'Antonio 3e Appendix A, PDF pages 532-536 (printed pp. 475-479) | ||
| Plaster Plaster, on laths/studs, air space | 0.3 | 0.1 | 0.1 | 0.05 | 0.04 | 0.05 | Cox & D'Antonio 3e Appendix A, PDF pages 532-536 (printed pp. 475-479) | ||
| Plaster Plaster, gypsum, or lime, smooth finish on tile or brick | 0.013 | 0.015 | 0.02 | 0.03 | 0.04 | 0.05 | Cox & D'Antonio 3e Appendix A, PDF pages 532-536 (printed pp. 475-479) | ||
| Plaster Plaster, lime, or gypsum on solid backing | 0.03 | 0.03 | 0.02 | 0.03 | 0.04 | 0.05 | Cox & D'Antonio 3e Appendix A, PDF pages 532-536 (printed pp. 475-479) | ||
| Plaster Acoustics plaster | 0.3 | 0.35 | 0.5 | 0.7 | 0.7 | 0.7 | Cox & D'Antonio 3e Appendix A, PDF pages 532-536 (printed pp. 475-479) | ||
| Plaster Acoustics plaster, 40 mm thick | 0.31 | 0.55 | 0.84 | 0.78 | 0.71 | 0.54 | Cox & D'Antonio 3e Appendix A, PDF pages 532-536 (printed pp. 475-479) | ||
| Plaster Acoustics plaster, 68 mm thick | 0.47 | 0.74 | 0.76 | 0.65 | 0.62 | 0.49 | Cox & D'Antonio 3e Appendix A, PDF pages 532-536 (printed pp. 475-479) | ||
| Plasterboard Gypsum board, 1.27 cm nailed to studs with 4.1 m c-t-c | 0.29 | 0.1 | 0.05 | 0.04 | 0.07 | 0.09 | Cox & D'Antonio 3e Appendix A, PDF pages 532-536 (printed pp. 475-479) | ||
| Plasterboard Plasterboard on frame, 9.5 mm boards, 10 cm empty cavity | 0.11 | 0.13 | 0.05 | 0.03 | 0.02 | 0.03 | Cox & D'Antonio 3e Appendix A, PDF pages 532-536 (printed pp. 475-479) | ||
| Plasterboard Plasterboard on frame, 9.5 mm boards, 10 cm cavity filled with mineral wool | 0.28 | 0.14 | 0.09 | 0.06 | 0.05 | 0.05 | Cox & D'Antonio 3e Appendix A, PDF pages 532-536 (printed pp. 475-479) | ||
| Plasterboard Plasterboard on frame, 13 mm boards, 10 cm empty cavity | 0.08 | 0.11 | 0.05 | 0.03 | 0.02 | 0.03 | Cox & D'Antonio 3e Appendix A, PDF pages 532-536 (printed pp. 475-479) | ||
| Plasterboard Plasterboard on frame, 13 mm boards, 10 cm cavity filled with mineral wool | 0.3 | 0.12 | 0.08 | 0.06 | 0.06 | 0.05 | Cox & D'Antonio 3e Appendix A, PDF pages 532-536 (printed pp. 475-479) | ||
| Plasterboard 2 × 13 mm plasterboard on steel frame, 5 cm mineral wool in cavity, surface painted | 0.15 | 0.1 | 0.06 | 0.04 | 0.04 | 0.05 | Cox & D'Antonio 3e Appendix A, PDF pages 532-536 (printed pp. 475-479) | ||
| Glazing Glass, ordinary window glass | 0.35 | 0.25 | 0.18 | 0.12 | 0.07 | 0.04 | Cox & D'Antonio 3e Appendix A, PDF pages 532-536 (printed pp. 475-479) | ||
| Glazing Single pane of glass, 3–4 mm | 0.2 | 0.15 | 0.1 | 0.07 | 0.05 | 0.05 | Cox & D'Antonio 3e Appendix A, PDF pages 532-536 (printed pp. 475-479) | ||
| Glazing Single pane of glass, >4 mm | 0.1 | 0.07 | 0.04 | 0.03 | 0.02 | 0.02 | Cox & D'Antonio 3e Appendix A, PDF pages 532-536 (printed pp. 475-479) | ||
| Glazing Single pane of glass, 3 mm | 0.08 | 0.04 | 0.03 | 0.03 | 0.02 | 0.02 | Cox & D'Antonio 3e Appendix A, PDF pages 532-536 (printed pp. 475-479) | ||
| Glazing Double glazing, 2–3 mm glass, 1 cm gap | 0.1 | 0.07 | 0.05 | 0.03 | 0.02 | 0.02 | Cox & D'Antonio 3e Appendix A, PDF pages 532-536 (printed pp. 475-479) | ||
| Glazing Double glazing, 2–3 mm glass, >3 cm gap | 0.15 | 0.05 | 0.03 | 0.03 | 0.02 | 0.02 | Cox & D'Antonio 3e Appendix A, PDF pages 532-536 (printed pp. 475-479) | ||
| Glazing Glass, large panes, heavy glass | 0.18 | 0.06 | 0.04 | 0.03 | 0.02 | 0.02 | Cox & D'Antonio 3e Appendix A, PDF pages 532-536 (printed pp. 475-479) | ||
| Wools and foam 25 mm fibreglass, rigid backing | 0.08 | 0.25 | 0.45 | 0.75 | 0.75 | 0.65 | Cox & D'Antonio 3e Appendix A, PDF pages 532-536 (printed pp. 475-479) | ||
| Wools and foam 2.54 cm fibreglass, 24 to 48 kg/m³ | 0.08 | 0.25 | 0.65 | 0.85 | 0.8 | 0.75 | Cox & D'Antonio 3e Appendix A, PDF pages 532-536 (printed pp. 475-479) | ||
| Wools and foam 2.5 cm fibreglass, 2.5 cm airspace | 0.15 | 0.55 | 0.8 | 0.9 | 0.85 | 0.8 | Cox & D'Antonio 3e Appendix A, PDF pages 532-536 (printed pp. 475-479) | ||
| Wools and foam 5 cm fibreglass, rigid backing | 0.21 | 0.5 | 0.75 | 0.9 | 0.85 | 0.8 | Cox & D'Antonio 3e Appendix A, PDF pages 532-536 (printed pp. 475-479) | ||
| Wools and foam 7.5 cm fibreglass, rigid backing | 0.35 | 0.65 | 0.8 | 0.9 | 0.85 | 0.8 | Cox & D'Antonio 3e Appendix A, PDF pages 532-536 (printed pp. 475-479) | ||
| Wools and foam 10 cm fibreglass, rigid backing | 0.45 | 0.9 | 0.95 | 1 | 0.95 | 0.85 | Cox & D'Antonio 3e Appendix A, PDF pages 532-536 (printed pp. 475-479) | ||
| Wools and foam 5 cm mineral wool (40 kg/m³), glued to wall, untreated surface | 0.15 | 0.7 | 0.6 | 0.6 | 0.85 | 0.9 | Cox & D'Antonio 3e Appendix A, PDF pages 532-536 (printed pp. 475-479) | ||
| Wools and foam 5 cm mineral wool (40 kg/m³), glued to wall, surface sprayed with thin plastic solution | 0.15 | 0.7 | 0.6 | 0.6 | 0.75 | 0.75 | Cox & D'Antonio 3e Appendix A, PDF pages 532-536 (printed pp. 475-479) | ||
| Wools and foam 5 cm mineral wool (70 kg/m³) 30 cm in front of wall | 0.7 | 0.45 | 0.65 | 0.6 | 0.75 | 0.65 | Cox & D'Antonio 3e Appendix A, PDF pages 532-536 (printed pp. 475-479) | ||
| Wools and foam 5 cm wood-wool set in mortar | 0.08 | 0.17 | 0.35 | 0.45 | 0.65 | 0.65 | Cox & D'Antonio 3e Appendix A, PDF pages 532-536 (printed pp. 475-479) | ||
| Wools and foam 5.1 cm fibreglass, panels with plastic sheet wrapping and perforated metal facing | 0.33 | 0.79 | 0.99 | 0.91 | 0.76 | 0.64 | Cox & D'Antonio 3e Appendix A, PDF pages 532-536 (printed pp. 475-479) | ||
| Wools and foam 5.1 cm fibreglass, 24–48 kg/m³ | 0.17 | 0.55 | 0.8 | 0.9 | 0.85 | 0.8 | Cox & D'Antonio 3e Appendix A, PDF pages 532-536 (printed pp. 475-479) | ||
| Wools and foam Acoustic tile, 1.27 cm thick | 0.07 | 0.21 | 0.66 | 0.75 | 0.62 | 0.49 | Cox & D'Antonio 3e Appendix A, PDF pages 532-536 (printed pp. 475-479) | ||
| Wools and foam Acoustic tile, 1.9 cm thick | 0.09 | 0.28 | 0.78 | 0.84 | 0.73 | 0.64 | Cox & D'Antonio 3e Appendix A, PDF pages 532-536 (printed pp. 475-479) | ||
| Wools and foam Polyurethane foam, 2.5 cm thick | 0.16 | 0.25 | 0.45 | 0.84 | 0.97 | 0.87 | Cox & D'Antonio 3e Appendix A, PDF pages 532-536 (printed pp. 475-479) | ||
| Wools and foam Thermafleece, sheep wool absorbent 100 mm thick | 0.47 | 0.86 | 1 | 0.94 | 0.96 | 1.02 | Cox & D'Antonio 3e Appendix A, PDF pages 532-536 (printed pp. 475-479) | ||
| Ballast Ballast or other crushed stone, 3.18 cm, 15.2 deep | 0.19 | 0.23 | 0.43 | 0.37 | 0.58 | 0.62 | Cox & D'Antonio 3e Appendix A, PDF pages 532-536 (printed pp. 475-479) | ||
| Ballast Ballast or other crushed stone, 3.18 cm, 30.5 cm deep | 0.27 | 0.58 | 0.48 | 0.54 | 0.73 | 0.63 | Cox & D'Antonio 3e Appendix A, PDF pages 532-536 (printed pp. 475-479) | ||
| Ballast Ballast or other crushed stone, 3.18 cm, 45.7 cm deep | 0.41 | 0.53 | 0.64 | 0.84 | 0.91 | 0.63 | Cox & D'Antonio 3e Appendix A, PDF pages 532-536 (printed pp. 475-479) | ||
| Ballast Ballast or other crushed stone, 0.64 cm, 15.2 cm deep | 0.22 | 0.64 | 0.7 | 0.79 | 0.88 | 0.72 | Cox & D'Antonio 3e Appendix A, PDF pages 532-536 (printed pp. 475-479) | ||
| Microperforated absorber Microperforated absorber 4 cm cavity | 0.08 | 0.27 | 0.7 | 0.35 | 0.11 | 0.04 | Cox & D'Antonio 3e Appendix A, PDF pages 532-536 (printed pp. 475-479) | ||
| Microperforated absorber Microperforated absorber 40 cm cavity | 0.64 | 0.56 | 0.41 | 0.28 | 0.13 | 0.06 | Cox & D'Antonio 3e Appendix A, PDF pages 532-536 (printed pp. 475-479) | ||
| Diffusers Hybrid absorber-diffuser (BAD panel mounted on 2.5 cm fibreglass) | 0.17 | 0.4 | 0.86 | 1 | 0.84 | 0.61 | Cox & D'Antonio 3e Appendix A, PDF pages 532-536 (printed pp. 475-479) | ||
| Diffusers 2D N = 7 QRD, design freq. = 500 Hz | 0.14 | 0.12 | 0.14 | 0.2 | 0.09 | 0.12 | Cox & D'Antonio 3e Appendix A, PDF pages 532-536 (printed pp. 475-479) | ||
| Diffusers 2D N = 7 QRD as line above, with cloth covering | 0.16 | 0.17 | 0.28 | 0.41 | 0.26 | 0.3 | Cox & D'Antonio 3e Appendix A, PDF pages 532-536 (printed pp. 475-479) | ||
| Diffusers 1D N = 7 QRD, design freq. = 500 Hz | 0.11 | 0.1 | 0.07 | 0.08 | 0.06 | 0.06 | Cox & D'Antonio 3e Appendix A, PDF pages 532-536 (printed pp. 475-479) | ||
| Diffusers 1D N = 7 QRD as line above, with cloth covering | 0.13 | 0.14 | 0.2 | 0.24 | 0.2 | 0.23 | Cox & D'Antonio 3e Appendix A, PDF pages 532-536 (printed pp. 475-479) | ||
| Green wall systems Data from Azkorra et al. | 0.46 | 0.42 | 0.36 | 0.38 | 0.45 | 0.5 | Cox & D'Antonio 3e Appendix A, PDF pages 532-536 (printed pp. 475-479) | ||
| Green wall systems Data from Wong et al. (100% greenery) | 0.09 | 0.23 | 0.43 | 0.46 | 0.5 | 0.48 | Cox & D'Antonio 3e Appendix A, PDF pages 532-536 (printed pp. 475-479) | ||
| Green wall systems Data from Yang et al. | 0.61 | 0.62 | 0.69 | 0.68 | 0.68 | 0.72 | Cox & D'Antonio 3e Appendix A, PDF pages 532-536 (printed pp. 475-479) | ||
| Top soil with different percentage of vegetative cover Top soil with different percentage of vegetative cover 0%, bare soil | 0.27 | 0.57 | 0.76 | 0.9 | 0.89 | 0.84 | Cox & D'Antonio 3e Appendix A, PDF pages 532-536 (printed pp. 475-479) | ||
| Top soil with different percentage of vegetative cover Top soil with different percentage of vegetative cover 20% | 0.34 | 0.63 | 0.79 | 0.92 | 0.89 | 0.81 | Cox & D'Antonio 3e Appendix A, PDF pages 532-536 (printed pp. 475-479) | ||
| Top soil with different percentage of vegetative cover Top soil with different percentage of vegetative cover 40% | 0.39 | 0.68 | 0.83 | 0.95 | 0.9 | 0.83 | Cox & D'Antonio 3e Appendix A, PDF pages 532-536 (printed pp. 475-479) | ||
| Top soil with different percentage of vegetative cover Top soil with different percentage of vegetative cover 60% | 0.45 | 0.72 | 0.85 | 0.97 | 0.9 | 0.8 | Cox & D'Antonio 3e Appendix A, PDF pages 532-536 (printed pp. 475-479) | ||
| Top soil with different percentage of vegetative cover Top soil with different percentage of vegetative cover 80% | 0.46 | 0.73 | 0.85 | 0.97 | 0.89 | 0.72 | Cox & D'Antonio 3e Appendix A, PDF pages 532-536 (printed pp. 475-479) | ||
| Top soil with different percentage of vegetative cover Top soil with different percentage of vegetative cover 100%, completely covered | 0.49 | 0.75 | 0.89 | 0.98 | 0.91 | 0.73 | Cox & D'Antonio 3e Appendix A, PDF pages 532-536 (printed pp. 475-479) | ||
| Top soil with different moisture content Top soil with different moisture content 12.5% | 0.26 | 0.55 | 0.73 | 0.89 | 0.85 | 0.67 | Cox & D'Antonio 3e Appendix A, PDF pages 532-536 (printed pp. 475-479) | ||
| Top soil with different moisture content Top soil with different moisture content 17% | 0.25 | 0.51 | 0.69 | 0.81 | 0.78 | 0.57 | Cox & D'Antonio 3e Appendix A, PDF pages 532-536 (printed pp. 475-479) | ||
| Top soil with different moisture content Top soil with different moisture content 20.4% | 0.23 | 0.45 | 0.57 | 0.64 | 0.58 | 0.38 | Cox & D'Antonio 3e Appendix A, PDF pages 532-536 (printed pp. 475-479) | ||
| Top soil with different moisture content Top soil with different moisture content 23.8% | 0.2 | 0.36 | 0.43 | 0.46 | 0.38 | 0.2 | Cox & D'Antonio 3e Appendix A, PDF pages 532-536 (printed pp. 475-479) | ||
| Top soil with different moisture content Top soil with different moisture content 25.4% | 0.14 | 0.28 | 0.33 | 0.34 | 0.29 | 0.12 | Cox & D'Antonio 3e Appendix A, PDF pages 532-536 (printed pp. 475-479) | ||
| Top soil with different moisture content Top soil with different moisture content 34.1% | 0.07 | 0.22 | 0.23 | 0.24 | 0.2 | 0.06 | Cox & D'Antonio 3e Appendix A, PDF pages 532-536 (printed pp. 475-479) | ||
| Pared de ladrillo | 0.025 | 0.025 | 0.03 | 0.04 | 0.05 | 0.07 | Arau-Puchades (1999) Tabla 6.1, PDF pages 193-195 (printed pp. 190-192) | ||
| Pared de ladrillo pintado | 0.01 | 0.01 | 0.02 | 0.02 | 0.02 | 0.02 | Arau-Puchades (1999) Tabla 6.1, PDF pages 193-195 (printed pp. 190-192) | ||
| Pared de ladrillo encalada | 0.02 | 0.02 | 0.02 | 0.03 | 0.03 | Arau-Puchades (1999) Tabla 6.1, PDF pages 193-195 (printed pp. 190-192) | |||
| Bloque de hormigón áspero | 0.36 | 0.44 | 0.31 | 0.29 | 0.39 | 0.25 | Arau-Puchades (1999) Tabla 6.1, PDF pages 193-195 (printed pp. 190-192) | ||
| Bloque de hormigón pintado | 0.1 | 0.05 | 0.06 | 0.07 | 0.09 | 0.08 | Arau-Puchades (1999) Tabla 6.1, PDF pages 193-195 (printed pp. 190-192) | ||
| Hormigón de obra fino | 0.01 to 0.02 | 0.01 to 0.02 | 0.02 to 0.04 | 0.02 to 0.06 | 0.02 to 0.08 | 0.03 to 0.1 | Arau-Puchades (1999) Tabla 6.1, PDF pages 193-195 (printed pp. 190-192) | ||
| Hormigón de obra pintado al esmalte | 0.01 | 0.01 | 0.01 | 0.02 | 0.02 | 0.02 | Arau-Puchades (1999) Tabla 6.1, PDF pages 193-195 (printed pp. 190-192) | ||
| Hormigón enfoscado muy fino | 0.004 | 0.004 | 0.005 | 0.006 | 0.008 | 0.015 | Arau-Puchades (1999) Tabla 6.1, PDF pages 193-195 (printed pp. 190-192) | ||
| Yeso, escayola, 5 cm | 0.08 | 0.06 | 0.05 | 0.04 | 0.04 | 0.04 | Arau-Puchades (1999) Tabla 6.1, PDF pages 193-195 (printed pp. 190-192) | ||
| Yeso, escayola fibrosa, 5 cm | 0.35 | 0.3 | 0.2 | 0.55 | 0.1 | 0.04 | Arau-Puchades (1999) Tabla 6.1, PDF pages 193-195 (printed pp. 190-192) | ||
| Enlucido de paredes | 0.01 to 0.04 | 0.01 to 0.04 | 0.02 to 0.04 | 0.03 to 0.06 | 0.04 to 0.06 | 0.03 to 0.06 | Arau-Puchades (1999) Tabla 6.1, PDF pages 193-195 (printed pp. 190-192) | ||
| Yeso, escayola, con acabado áspero | 0.14 | 0.1 | 0.06 | 0.05 | 0.04 | 0.03 | Arau-Puchades (1999) Tabla 6.1, PDF pages 193-195 (printed pp. 190-192) | ||
| Yeso, escayola, con acabado fino | 0.14 | 0.1 | 0.06 | 0.04 | 0.04 | 0.03 | Arau-Puchades (1999) Tabla 6.1, PDF pages 193-195 (printed pp. 190-192) | ||
| Yeso 25 mm con cámara aire en el dorso | 0.16 | 0.1 | 0.06 | 0.04 | 0.04 | 0.04 | Arau-Puchades (1999) Tabla 6.1, PDF pages 193-195 (printed pp. 190-192) | ||
| Tablero de cartón yeso de 13 mm con cámara aire en el dorso sujeto por perfiles 5 × 10 cm interdistanciados 40 cm | 0.29 | 0.1 | 0.05 | 0.04 | 0.07 | 0.09 | Arau-Puchades (1999) Tabla 6.1, PDF pages 193-195 (printed pp. 190-192) | ||
| Tablero de yeso de 15 mm montado en idénticas condiciones que 15 | 0.2 | 0.08 | 0.05 | 0.05 | 0.05 | 0.05 | Arau-Puchades (1999) Tabla 6.1, PDF pages 193-195 (printed pp. 190-192) | ||
| Mármol o baldosa pulida | 0.01 | 0.01 | 0.01 | 0.01 | 0.02 | 0.02 | Arau-Puchades (1999) Tabla 6.1, PDF pages 193-195 (printed pp. 190-192) | ||
| Contrachapado de madera de 10 mm formando pequeñas cavidades máx. 25 mm en dorso | 0.28 | 0.22 | 0.17 | 0.09 | 0.1 | 0.08 | Arau-Puchades (1999) Tabla 6.1, PDF pages 193-195 (printed pp. 190-192) | ||
| Contrachapado de madera de 6 mm con 80 mm cavidad de aire rellenada parcialmente con material absorbente | 0.6 | 0.3 | 0.1 | 0.09 | 0.09 | 0.09 | Arau-Puchades (1999) Tabla 6.1, PDF pages 193-195 (printed pp. 190-192) | ||
| Contrachapado de madera de 6 mm con 80 mm cavidad de aire rellenada parcialmente con material absorbente Igual que 19, pero sin material absorbente | 0.4 | 0.18 | 0.08 | 0.05 | 0.04 | 0.03 | Arau-Puchades (1999) Tabla 6.1, PDF pages 193-195 (printed pp. 190-192) | ||
| Contrachapado de madera de 3 mm con cavidad de aire en el dorso | 0.11 | 0.21 | 0.1 | 0.05 | 0.03 | 0.02 | Arau-Puchades (1999) Tabla 6.1, PDF pages 193-195 (printed pp. 190-192) | ||
| Madera fijada sólidamente a una pared o a un sólido | 0.04 | 0.04 | 0.03 | 0.03 | 0.03 | 0.02 | Arau-Puchades (1999) Tabla 6.1, PDF pages 193-195 (printed pp. 190-192) | ||
| Plafón de madera de pino de 20 mm y 50 mm de cámara de aire | 0.1 | 0.11 | 0.1 | 0.08 | 0.08 | 0.05 | Arau-Puchades (1999) Tabla 6.1, PDF pages 193-195 (printed pp. 190-192) | ||
| Plafón de madera de cedro con cámara en el dorso | 0.2 | 0.15 | 0.15 | 0.1 | 0.1 | 0.1 | Arau-Puchades (1999) Tabla 6.1, PDF pages 193-195 (printed pp. 190-192) | ||
| Madera delgada (5 a 10 mm) formando cámara de aire en el dorso | 0.42 | 0.21 | 0.06 | 0.05 | 0.04 | 0.04 | Arau-Puchades (1999) Tabla 6.1, PDF pages 193-195 (printed pp. 190-192) | ||
| Madera (10 a 13 mm) formando cámara de aire 50 a 100 mm en el dorso | 0.3 | 0.25 | 0.2 | 0.17 | 0.15 | 0.1 | Arau-Puchades (1999) Tabla 6.1, PDF pages 193-195 (printed pp. 190-192) | ||
| Madera sólida, 5 cm de espesor | 0.01 | 0.05 | 0.05 | 0.04 | 0.04 | 0.04 | Arau-Puchades (1999) Tabla 6.1, PDF pages 193-195 (printed pp. 190-192) | ||
| Vidrios de 6 mm área pequeña | 0.04 | 0.04 | 0.03 | 0.03 | 0.02 | 0.02 | Arau-Puchades (1999) Tabla 6.1, PDF pages 193-195 (printed pp. 190-192) | ||
| Vidrios de 6 mm área grande | 0.18 | 0.06 | 0.04 | 0.03 | 0.02 | 0.018 | Arau-Puchades (1999) Tabla 6.1, PDF pages 193-195 (printed pp. 190-192) | ||
| Vidrio de 3 mm ventana | 0.35 | 0.25 | 0.18 | 0.12 | 0.07 | 0.04 | Arau-Puchades (1999) Tabla 6.1, PDF pages 193-195 (printed pp. 190-192) | ||
| Vitrinas emplomadas 3 mm | 0.64 | 0.4 | 0.2 | 0.13 | 0.17 | 0.05 | Arau-Puchades (1999) Tabla 6.1, PDF pages 193-195 (printed pp. 190-192) | ||
| Vidrios pesados luna grande | 0.18 | 0.06 | 0.04 | 0.03 | 0.02 | 0.02 | Arau-Puchades (1999) Tabla 6.1, PDF pages 193-195 (printed pp. 190-192) | ||
| Pavimento cerámico | 0.01 | 0.01 | 0.01 | 0.02 | 0.02 | 0.02 | Arau-Puchades (1999) Tabla 6.1, PDF pages 193-195 (printed pp. 190-192) | ||
| Baldosa de tierra sobre hormigón | 0.02 | 0.03 | 0.03 | 0.03 | 0.03 | 0.02 | Arau-Puchades (1999) Tabla 6.1, PDF pages 193-195 (printed pp. 190-192) | ||
| Loseta de caucho sobre hormigón | 0.019 | 0.033 | 0.04 | 0.036 | 0.018 | 0.02 | Arau-Puchades (1999) Tabla 6.1, PDF pages 193-195 (printed pp. 190-192) | ||
| Loseta de linóleo sobre hormigón | 0.04 | 0.03 | 0.04 | 0.04 | 0.03 | 0.02 | Arau-Puchades (1999) Tabla 6.1, PDF pages 193-195 (printed pp. 190-192) | ||
| Loseta de plástico vinílico sobre hormigón | 0.04 | 0.03 | 0.04 | 0.04 | 0.03 | 0.02 | Arau-Puchades (1999) Tabla 6.1, PDF pages 193-195 (printed pp. 190-192) | ||
| Losa de corcho de 2 cm encerada y pulida | 0.04 | 0.03 | 0.05 | 0.11 | 0.07 | 0.02 | Arau-Puchades (1999) Tabla 6.1, PDF pages 193-195 (printed pp. 190-192) | ||
| Parqué sobre rastreles | 0.05 | 0.03 | 0.06 | 0.09 | 0.1 | 0.2 | Arau-Puchades (1999) Tabla 6.1, PDF pages 193-195 (printed pp. 190-192) | ||
| Parqué encima de hormigón | 0.04 | 0.04 | 0.07 | 0.06 | 0.06 | 0.07 | Arau-Puchades (1999) Tabla 6.1, PDF pages 193-195 (printed pp. 190-192) | ||
| Madera barnizada sobre vigas | 0.15 | 0.11 | 0.1 | 0.07 | 0.06 | 0.07 | Arau-Puchades (1999) Tabla 6.1, PDF pages 193-195 (printed pp. 190-192) | ||
| Plataformas de madera con gran profundidad de aire | 0.4 | 0.3 | 0.2 | 0.17 | 0.15 | 0.1 | Arau-Puchades (1999) Tabla 6.1, PDF pages 193-195 (printed pp. 190-192) | ||
| Alfombra gruesa encima de hormigón | 0.02 | 0.06 | 0.14 | 0.37 | 0.6 | 0.65 | Arau-Puchades (1999) Tabla 6.1, PDF pages 193-195 (printed pp. 190-192) | ||
| Alfombra gruesa encima de fieltro o caucho espumado | 0.08 | 0.24 | 0.57 | 0.69 | 0.71 | 0.73 | Arau-Puchades (1999) Tabla 6.1, PDF pages 193-195 (printed pp. 190-192) | ||
| Alfombra pesada con látex impermeable encima de fieltro o caucho espumado | 0.08 | 0.27 | 0.39 | 0.34 | 0.48 | 0.63 | Arau-Puchades (1999) Tabla 6.1, PDF pages 193-195 (printed pp. 190-192) | ||
| Moqueta de 10 mm sobre pared | 0.09 | 0.08 | 0.21 | 0.27 | 0.27 | 0.37 | Arau-Puchades (1999) Tabla 6.1, PDF pages 193-195 (printed pp. 190-192) | ||
| Moqueta de 3 mm sobre fieltro encima de hormigón | 0.11 | 0.14 | 0.37 | 0.43 | 0.27 | 0.25 | Arau-Puchades (1999) Tabla 6.1, PDF pages 193-195 (printed pp. 190-192) | ||
| Moqueta de goma de 5 mm | 0.04 | 0.04 | 0.08 | 0.12 | 0.13 | 0.1 | Arau-Puchades (1999) Tabla 6.1, PDF pages 193-195 (printed pp. 190-192) | ||
| Cortina ligera de algodón de 340 g/m² de gramaje, plana a la pared | 0.03 | 0.04 | 0.11 | 0.17 | 0.24 | 0.35 | Arau-Puchades (1999) Tabla 6.1, PDF pages 193-195 (printed pp. 190-192) | ||
| Cortina de algodón de 480 g/m² plana a la pared | 0.05 | 0.07 | 0.13 | 0.22 | 0.32 | 0.35 | Arau-Puchades (1999) Tabla 6.1, PDF pages 193-195 (printed pp. 190-192) | ||
| Cortina de terciopelo de 620 g/m² plana a la pared | 0.05 | 0.12 | 0.35 | 0.45 | 0.38 | 0.36 | Arau-Puchades (1999) Tabla 6.1, PDF pages 193-195 (printed pp. 190-192) | ||
| Cortina de algodón de 340 g/m² fruncida al 150 % | 0.07 | 0.31 | 0.49 | 0.81 | 0.66 | 0.54 | Arau-Puchades (1999) Tabla 6.1, PDF pages 193-195 (printed pp. 190-192) | ||
| Cortina de algodón de 480 g/m² fruncida al 150 % | 0.07 | 0.31 | 0.49 | 0.75 | 0.7 | 0.6 | Arau-Puchades (1999) Tabla 6.1, PDF pages 193-195 (printed pp. 190-192) | ||
| Cortina de algodón de 620 g/m² fruncida al 150 % | 0.14 | 0.35 | 0.55 | 0.72 | 0.7 | 0.65 | Arau-Puchades (1999) Tabla 6.1, PDF pages 193-195 (printed pp. 190-192) | ||
| Cortina de algodón de 340 g/m² fruncida al 187,5 % | 0.03 | 0.12 | 0.15 | 0.27 | 0.37 | 0.42 | Arau-Puchades (1999) Tabla 6.1, PDF pages 193-195 (printed pp. 190-192) | ||
| Cortina de algodón de 340 g/m² fruncida al 175 % | 0.04 | 0.23 | 0.4 | 0.57 | 0.53 | 0.4 | Arau-Puchades (1999) Tabla 6.1, PDF pages 193-195 (printed pp. 190-192) | ||
| Fieltro de 25 mm | 0.18 | 0.36 | 0.71 | 0.79 | 0.82 | 0.85 | Arau-Puchades (1999) Tabla 6.1, PDF pages 193-195 (printed pp. 190-192) | ||
| Fieltro de 25 mm con intervalos de aire a 50 mm | 0.35 | 0.62 | 0.88 | 0.92 | 0.78 | 0.84 | Arau-Puchades (1999) Tabla 6.1, PDF pages 193-195 (printed pp. 190-192) | ||
| Fibra de vidrio 22 kg/m² 30 mm | 0.1 | 0.32 | 0.55 | 0.66 | 0.79 | 0.77 | Arau-Puchades (1999) Tabla 6.1, PDF pages 193-195 (printed pp. 190-192) | ||
| Fibra de vidrio 22 kg/m² 30 mm Ídem 50 mm | 0.19 | 0.43 | 0.77 | 0.82 | 0.94 | 0.83 | Arau-Puchades (1999) Tabla 6.1, PDF pages 193-195 (printed pp. 190-192) | ||
| Fibra de vidrio 22 kg/m² 30 mm Ídem 70 mm | 0.33 | 0.65 | 0.88 | 0.91 | 0.97 | 0.94 | Arau-Puchades (1999) Tabla 6.1, PDF pages 193-195 (printed pp. 190-192) | ||
| Fibra de vidrio 22 kg/m² 30 mm Ídem 100 mm | 0.54 | 0.87 | 0.1 | 0.96 | 0.97 | 0.93 | Arau-Puchades (1999) Tabla 6.1, PDF pages 193-195 (printed pp. 190-192) | ||
| Agua (piscinas) | 0.01 | 0.01 | 0.01 | 0.01 | 0.02 | 0.02 | Arau-Puchades (1999) Tabla 6.1, PDF pages 193-195 (printed pp. 190-192) | ||
| Abertura de escenario | 0.3 | 0.4 | 0.5 | 0.6 | 0.6 | 0.5 | Arau-Puchades (1999) Tabla 6.1, PDF pages 193-195 (printed pp. 190-192) | ||
| Audiencia ocupando butacas bien tapizadas | 0.52 | 0.68 | 0.85 | 0.97 | 0.93 | 0.85 | Arau-Puchades (1999) Tabla 6.1, PDF pages 193-195 (printed pp. 190-192) | ||
| Butacas bien tapizadas | 0.49 | 0.66 | 0.8 | 0.88 | 0.82 | 0.7 | Arau-Puchades (1999) Tabla 6.1, PDF pages 193-195 (printed pp. 190-192) | ||
| Butacas tapizadas de cuero | 0.44 | 0.54 | 0.6 | 0.62 | 0.58 | 0.5 | Arau-Puchades (1999) Tabla 6.1, PDF pages 193-195 (printed pp. 190-192) | ||
| Bancos de iglesia de madera 100 % ocupados | 0.57 | 0.61 | 0.75 | 0.86 | 0.91 | 0.86 | Arau-Puchades (1999) Tabla 6.1, PDF pages 193-195 (printed pp. 190-192) | ||
| Asientos de madera 100 % ocupados | 0.6 | 0.74 | 0.88 | 0.96 | 0.93 | 0.85 | Arau-Puchades (1999) Tabla 6.1, PDF pages 193-195 (printed pp. 190-192) | ||
| Asientos de madera 75 % ocupados | 0.46 | 0.56 | 0.65 | 0.75 | 0.72 | 0.65 | Arau-Puchades (1999) Tabla 6.1, PDF pages 193-195 (printed pp. 190-192) | ||
| Lana de roca 100 kg/m² 30 mm | 0.07 | 0.4 | 0.88 | 0.92 | 0.96 | 1.05 | Arau-Puchades (1999) Tabla 6.1, PDF pages 193-195 (printed pp. 190-192) | ||
| Lana de roca 100 kg/m² 30 mm Ídem 50 mm | 0.19 | 0.74 | 0.95 | 0.98 | 0.96 | 1.04 | Arau-Puchades (1999) Tabla 6.1, PDF pages 193-195 (printed pp. 190-192) | ||
| Lana de roca 100 kg/m² 30 mm Ídem 80 mm | 0.35 | 0.86 | 0.92 | 0.99 | 1.02 | 1.03 | Arau-Puchades (1999) Tabla 6.1, PDF pages 193-195 (printed pp. 190-192) | ||
| Espuma de poliuretano de 15 mm con forro de plástico ligero | 0.02 | 0.08 | 0.24 | 0.48 | 0.72 | 0.7 | Arau-Puchades (1999) Tabla 6.1, PDF pages 193-195 (printed pp. 190-192) | ||
| Espuma de poliuretano de 15 mm con forro de plástico ligero Ídem 30 mm | 0.13 | 0.75 | 0.7 | 1.02 | 1 | 0.95 | Arau-Puchades (1999) Tabla 6.1, PDF pages 193-195 (printed pp. 190-192) | ||
| Espuma de poliuretano con forro film de plástico | 0.21 | 0.52 | 0.64 | 0.64 | 0.6 | 0.62 | Arau-Puchades (1999) Tabla 6.1, PDF pages 193-195 (printed pp. 190-192) | ||
| Panel metálico perforado Ø 20 mm p = 14.9 % Cavidad de aire 100 mm. Espesor fibra interior 30 mm. Espesor del plafón perforado 0.95 mm | 0.27 | 0.78 | 0.93 | 0.71 | 0.55 | 0.51 | Arau-Puchades (1999) Tabla 6.1, PDF pages 193-195 (printed pp. 190-192) | ||
| Panel metálico perforado Ø 20 mm p = 14.9 % Cavidad de aire 100 mm. Espesor fibra interior 30 mm. Espesor del plafón perforado 0.95 mm Igual que 80 con cavidad de aire 200 mm | 0.88 | 0.88 | 0.63 | 0.54 | 0.47 | Arau-Puchades (1999) Tabla 6.1, PDF pages 193-195 (printed pp. 190-192) | |||
| Panel metálico perforado Ø 20 mm p = 14.9 % Cavidad de aire 100 mm. Espesor fibra interior 30 mm. Espesor del plafón perforado 0.95 mm Igual que 80 con cavidad de aire 400 mm | 0.78 | 0.66 | 0.73 | 0.61 | 0.48 | Arau-Puchades (1999) Tabla 6.1, PDF pages 193-195 (printed pp. 190-192) | |||
| Resonador del tipo figura 6.9 y F.6.7 de ranuras en bloques de hormigón de 200 × 200 × 500 mm con fibra de vidrio en los alveolos | 0.72 | 0.58 | 0.77 | 0.72 | 0.49 | 0.45 | Arau-Puchades (1999) Tabla 6.1, PDF pages 193-195 (printed pp. 190-192) | ||
| Resonador del tipo figura 6.9 y F.6.7 de ranuras en bloques de hormigón de 200 × 200 × 500 mm con fibra de vidrio en los alveolos Igual que 83, pero con alveolos vacíos | 0.69 | 0.13 | 0.07 | 0.07 | 0.14 | 0.15 | Arau-Puchades (1999) Tabla 6.1, PDF pages 193-195 (printed pp. 190-192) | ||
| Revestimiento textil de muros 100 % poliamida, masa superficial 0.640, 1.8 mm grueso y reverso de fibras minerales | 0.02 | 0.03 | 0.09 | 0.14 | 0.29 | 0.57 | Arau-Puchades (1999) Tabla 6.1, PDF pages 193-195 (printed pp. 190-192) | ||
| Velo rizado 100 % PL VA 1.75 kg/m² de 6 mm, parte dorsal yute o algodón | 0.05 | 0.12 | 0.17 | 0.25 | 0.45 | 0.88 | Arau-Puchades (1999) Tabla 6.1, PDF pages 193-195 (printed pp. 190-192) | ||
| Tejido de napa + film PE 3 mm | 0.02 | 0.05 | 0.1 | 0.14 | 0.22 | 0.24 | Arau-Puchades (1999) Tabla 6.1, PDF pages 193-195 (printed pp. 190-192) | ||
| Tejido 53 % algodón 33 % fibra 14 % lino 0.24 kg/m² | 0.02 | 0.04 | 0.07 | 0.26 | 0.3 | 0.15 | Arau-Puchades (1999) Tabla 6.1, PDF pages 193-195 (printed pp. 190-192) | ||
| Tela de lino y en el dorso papel 0.48 kg/m² de 1.2 mm | 0.02 | 0.03 | 0.07 | 0.1 | 0.14 | 0.16 | Arau-Puchades (1999) Tabla 6.1, PDF pages 193-195 (printed pp. 190-192) | ||
| Revestimiento textura alveolar textil con fibras y en el dorso espuma de poliuretano 0.650 kg/m² de 7 mm | 0.06 | 0.09 | 0.14 | 0.19 | 0.6 | 0.88 | Arau-Puchades (1999) Tabla 6.1, PDF pages 193-195 (printed pp. 190-192) | ||
| Revestimiento textura alveolar textil con fibras y en el dorso espuma de poliuretano 0.650 kg/m² de 7 mm Ídem, pero 0.940 kg/m² de 17 mm | 0.05 | 0.19 | 0.35 | 0.84 | 0.98 | 0.89 | Arau-Puchades (1999) Tabla 6.1, PDF pages 193-195 (printed pp. 190-192) | ||
| Revestimiento textil de suelo o moqueta de terciopelo trenzado 100 % de 1.2 kg/m² espuma SBR en zona dorsal | 0.01 | 0.04 | 0.09 | 0.015 | 0.3 | 0.38 | Arau-Puchades (1999) Tabla 6.1, PDF pages 193-195 (printed pp. 190-192) | ||
| Moqueta con espuma SBR en zona dorsal 2.235 kg/m², 10 mm | 0.03 | 0.08 | 0.28 | 0.33 | 0.38 | 0.42 | Arau-Puchades (1999) Tabla 6.1, PDF pages 193-195 (printed pp. 190-192) | ||
| Moqueta tapiz trenzado 1.575 kg/m², 5.5 mm | 0.01 | 0.04 | 0.07 | 0.18 | 0.39 | 0.42 | Arau-Puchades (1999) Tabla 6.1, PDF pages 193-195 (printed pp. 190-192) | ||
| Pared de baldosa perforada, con lana mineral 5 cm + 50 cm de cámara de aire | 0.5 | 0.41 | 0.35 | 0.39 | 0.26 | 0.32 | Arau-Puchades (1999) Tabla 6.1, PDF pages 193-195 (printed pp. 190-192) | ||
| Rejillas del sistema de aire acondicionado La página imprime un solo intervalo, 0.15 – 0.50, a caballo de las columnas de 125 y 250 Hz, y no dice a qué bandas se aplica. | 0.15 – 0.50 | 0.15 – 0.50 | 0.15 – 0.50 | 0.15 – 0.50 | 0.15 – 0.50 | 0.15 – 0.50 | Arau-Puchades (1999) Tabla 6.1, PDF pages 193-195 (printed pp. 190-192) | ||
| Grava suelta y húmeda de 20 cm de grosor | 0.15 | 0.25 | 0.4 | 0.55 | 0.6 | 0.6 | Arau-Puchades (1999) Tabla 6.1, PDF pages 193-195 (printed pp. 190-192) | ||
| Suelo áspero | 0.21 | 0.52 | 0.64 | 0.64 | 0.6 | 0.62 | Arau-Puchades (1999) Tabla 6.1, PDF pages 193-195 (printed pp. 190-192) | ||
| Hierba 5 cm de altura | 0.11 | 0.26 | 0.6 | 0.69 | 0.82 | 0.99 | Arau-Puchades (1999) Tabla 6.1, PDF pages 193-195 (printed pp. 190-192) | ||
| POROUS TYPE Drapes: cotton 14 oz/sq yd draped to 7/8 area | 0.03 | 0.12 | 0.15 | 0.27 | 0.37 | 0.42 | Everest 4e Appendix, PDF pages 610-612 (printed pp. 585-587) | ||
| POROUS TYPE Drapes: cotton 14 oz/sq yd draped to 3/4 area | 0.04 | 0.23 | 0.4 | 0.57 | 0.53 | 0.4 | Everest 4e Appendix, PDF pages 610-612 (printed pp. 585-587) | ||
| POROUS TYPE Drapes: cotton 14 oz/sq yd draped to 1/2 area | 0.07 | 0.37 | 0.49 | 0.81 | 0.65 | 0.54 | Everest 4e Appendix, PDF pages 610-612 (printed pp. 585-587) | ||
| POROUS TYPE Drapes: medium velour, 14 oz/sq yd draped to 1/2 area | 0.07 | 0.31 | 0.49 | 0.75 | 0.7 | 0.6 | Everest 4e Appendix, PDF pages 610-612 (printed pp. 585-587) | ||
| POROUS TYPE Drapes: heavy velour, 18 oz/sq yd draped to 1/2 area | 0.14 | 0.35 | 0.55 | 0.72 | 0.7 | 0.65 | Everest 4e Appendix, PDF pages 610-612 (printed pp. 585-587) | ||
| POROUS TYPE Carpet: heavy on concrete | 0.02 | 0.06 | 0.14 | 0.37 | 0.6 | 0.65 | Everest 4e Appendix, PDF pages 610-612 (printed pp. 585-587) | ||
| POROUS TYPE Carpet: heavy on 40 oz hair felt | 0.08 | 0.24 | 0.57 | 0.69 | 0.71 | 0.73 | Everest 4e Appendix, PDF pages 610-612 (printed pp. 585-587) | ||
| POROUS TYPE Carpet: heavy with latex backing on foam or 40 oz hair felt | 0.08 | 0.27 | 0.39 | 0.34 | 0.48 | 0.63 | Everest 4e Appendix, PDF pages 610-612 (printed pp. 585-587) | ||
| POROUS TYPE Carpet: indoor/ outdoor | 0.01 | 0.05 | 0.1 | 0.2 | 0.45 | 0.65 | Everest 4e Appendix, PDF pages 610-612 (printed pp. 585-587) | ||
| POROUS TYPE Acoustical tile, ave, 1/2” thick | 0.07 | 0.21 | 0.66 | 0.75 | 0.62 | 0.49 | Everest 4e Appendix, PDF pages 610-612 (printed pp. 585-587) | ||
| POROUS TYPE Acoustical tile, ave, 3/4” thick | 0.09 | 0.28 | 0.78 | 0.84 | 0.73 | 0.64 | Everest 4e Appendix, PDF pages 610-612 (printed pp. 585-587) | ||
| MISC. BUILDING MATERIALS Concrete block, coarse | 0.36 | 0.44 | 0.31 | 0.29 | 0.39 | 0.25 | Everest 4e Appendix, PDF pages 610-612 (printed pp. 585-587) | ||
| MISC. BUILDING MATERIALS Concrete block, painted | 0.1 | 0.05 | 0.06 | 0.07 | 0.09 | 0.08 | Everest 4e Appendix, PDF pages 610-612 (printed pp. 585-587) | ||
| MISC. BUILDING MATERIALS Concrete floor | 0.01 | 0.01 | 0.015 | 0.02 | 0.02 | 0.02 | Everest 4e Appendix, PDF pages 610-612 (printed pp. 585-587) | ||
| MISC. BUILDING MATERIALS Floor: linoleum, Asphalt-tile, or cork tile on concrete | 0.02 | 0.03 | 0.03 | 0.03 | 0.03 | 0.02 | Everest 4e Appendix, PDF pages 610-612 (printed pp. 585-587) | ||
| MISC. BUILDING MATERIALS Floor: wood | 0.15 | 0.11 | 0.1 | 0.07 | 0.06 | 0.07 | Everest 4e Appendix, PDF pages 610-612 (printed pp. 585-587) | ||
| MISC. BUILDING MATERIALS Glass: large panes, heavy glass | 0.18 | 0.06 | 0.04 | 0.03 | 0.02 | 0.02 | Everest 4e Appendix, PDF pages 610-612 (printed pp. 585-587) | ||
| MISC. BUILDING MATERIALS Glass, ordinary window | 0.35 | 0.25 | 0.18 | 0.12 | 0.07 | 0.04 | Everest 4e Appendix, PDF pages 610-612 (printed pp. 585-587) | ||
| MISC. BUILDING MATERIALS Drop Ceiling Owens-Corning Frescor, painted, 5/8” thick, Mounting 7 | 0.69 | 0.86 | 0.68 | 0.87 | 0.9 | 0.81 | Everest 4e Appendix, PDF pages 610-612 (printed pp. 585-587) | ||
| MISC. BUILDING MATERIALS Plaster, gypsum or lime, smooth finish on tile or brick | 0.013 | 0.015 | 0.02 | 0.03 | 0.04 | 0.05 | Everest 4e Appendix, PDF pages 610-612 (printed pp. 585-587) | ||
| MISC. BUILDING MATERIALS Plaster: gypsum or lime, smooth finish on lath | 0.14 | 0.1 | 0.06 | 0.05 | 0.04 | 0.03 | Everest 4e Appendix, PDF pages 610-612 (printed pp. 585-587) | ||
| MISC. BUILDING MATERIALS Gypsum board: 1/2” on 2 x 4s, 16” on centers | 0.29 | 0.1 | 0.05 | 0.04 | 0.07 | 0.09 | Everest 4e Appendix, PDF pages 610-612 (printed pp. 585-587) | ||
| RESONANT ABSORBERS Plywood panel: 3/8” thick | 0.28 | 0.22 | 0.17 | 0.09 | 0.1 | 0.11 | Everest 4e Appendix, PDF pages 610-612 (printed pp. 585-587) | ||
| RESONANT ABSORBERS Polycylindrical chord 45” height 16” empty | 0.41 | 0.4 | 0.33 | 0.25 | 0.2 | 0.22 | Everest 4e Appendix, PDF pages 610-612 (printed pp. 585-587) | ||
| RESONANT ABSORBERS Polycylindrical chord 35” height 12” empty | 0.37 | 0.35 | 0.32 | 0.28 | 0.22 | 0.22 | Everest 4e Appendix, PDF pages 610-612 (printed pp. 585-587) | ||
| RESONANT ABSORBERS Polycylindrical chord 28” height 10”empty | 0.32 | 0.35 | 0.3 | 0.25 | 0.2 | 0.23 | Everest 4e Appendix, PDF pages 610-612 (printed pp. 585-587) | ||
| RESONANT ABSORBERS Polycylindrical chord 28” height 10” filled | 0.35 | 0.5 | 0.38 | 0.3 | 0.22 | 0.18 | Everest 4e Appendix, PDF pages 610-612 (printed pp. 585-587) | ||
| RESONANT ABSORBERS Polycylindrical (Continued) chord 20” height 8” empty | 0.25 | 0.3 | 0.33 | 0.22 | 0.2 | 0.21 | Everest 4e Appendix, PDF pages 610-612 (printed pp. 585-587) | ||
| RESONANT ABSORBERS Polycylindrical (Continued) chord 20” height 8” filled | 0.3 | 0.42 | 0.35 | 0.23 | 0.19 | 0.2 | Everest 4e Appendix, PDF pages 610-612 (printed pp. 585-587) | ||
| RESONANT ABSORBERS Perforated Panel 5/32” thick, 4” depth, 2” glass fiber Perf: 0.18% | 0.4 | 0.7 | 0.3 | 0.12 | 0.1 | 0.05 | Everest 4e Appendix, PDF pages 610-612 (printed pp. 585-587) | ||
| RESONANT ABSORBERS Perforated Panel 5/32” thick, 4” depth, 2” glass fiber Perf: 0.79% | 0.4 | 0.84 | 0.4 | 0.16 | 0.14 | 0.12 | Everest 4e Appendix, PDF pages 610-612 (printed pp. 585-587) | ||
| RESONANT ABSORBERS Perforated Panel 5/32” thick, 4” depth, 2” glass fiber Perf. 1.4% | 0.25 | 0.96 | 0.66 | 0.26 | 0.16 | 0.1 | Everest 4e Appendix, PDF pages 610-612 (printed pp. 585-587) | ||
| RESONANT ABSORBERS Perforated Panel 5/32” thick, 4” depth, 2” glass fiber Perf:. 8.7% | 0.27 | 0.84 | 0.96 | 0.36 | 0.32 | 0.26 | Everest 4e Appendix, PDF pages 610-612 (printed pp. 585-587) | ||
| RESONANT ABSORBERS Perforated Panel 8” depth, 4” glass fiber Perf: 0.18% | 0.8 | 0.58 | 0.27 | 0.14 | 0.12 | 0.1 | Everest 4e Appendix, PDF pages 610-612 (printed pp. 585-587) | ||
| RESONANT ABSORBERS Perforated Panel 8” depth, 4” glass fiber Perf: 0.79% | 0.98 | 0.88 | 0.52 | 0.21 | 0.16 | 0.14 | Everest 4e Appendix, PDF pages 610-612 (printed pp. 585-587) | ||
| RESONANT ABSORBERS Perforated Panel 8” depth, 4” glass fiber Perf: 1.4% | 0.78 | 0.98 | 0.68 | 0.27 | 0.16 | 0.12 | Everest 4e Appendix, PDF pages 610-612 (printed pp. 585-587) | ||
| RESONANT ABSORBERS Perforated Panel 8” depth, 4” glass fiber Perf: 8.7% | 0.78 | 0.98 | 0.95 | 0.53 | 0.32 | 0.27 | Everest 4e Appendix, PDF pages 610-612 (printed pp. 585-587) | ||
| RESONANT ABSORBERS With 7” air space plus 1” mineral fiber of 9-10 16 cu ft/lb density, 1/4” cover Wideband, 25% perf or more | 0.67 | 1.09 | 0.98 | 0.93 | 0.98 | 0.96 | Everest 4e Appendix, PDF pages 610-612 (printed pp. 585-587) | ||
| RESONANT ABSORBERS With 7” air space plus 1” mineral fiber of 9-10 16 cu ft/lb density, 1/4” cover Midpeak, 5% perf | 0.6 | 0.98 | 0.82 | 0.9 | 0.49 | 0.3 | Everest 4e Appendix, PDF pages 610-612 (printed pp. 585-587) | ||
| RESONANT ABSORBERS With 7” air space plus 1” mineral fiber of 9-10 16 cu ft/lb density, 1/4” cover Lo-peak, 0.5% perf | 0.74 | 0.53 | 0.4 | 0.3 | 0.14 | 0.16 | Everest 4e Appendix, PDF pages 610-612 (printed pp. 585-587) | ||
| RESONANT ABSORBERS With 2” air space filled with mineral fiber, 9-10 lb/cu ft density Perf: 0.5% | 0.48 | 0.78 | 0.6 | 0.38 | 0.32 | 0.16 | Everest 4e Appendix, PDF pages 610-612 (printed pp. 585-587) |
Absorption areas of people and air
Section titled “Absorption areas of people and air”Bies and Long also print a few rows that are not coefficients: an audience per person, a musician with an instrument, the air itself, priced in equivalent absorption area because they have no surface a coefficient could multiply.
Those are held apart, in materials.absorbers.PUBLISHED_ABSORPTION_AREAS,
with the unit in the field name so that a number from there cannot be
mistaken for a coefficient. Long prices his in sabins, square feet, in a
table set in inches and pounds; the field holds square metres, as every
other field of this library does, and says on the cell what the page
printed and what it was converted from.
Italic is a value this library worked out; a dotted underline is a cell that is not a plain number, and what it is reads on the cell; an asterisk is a note the page made about the row. Click a mark to read it, or give the table focus and press Enter to walk the marks with the arrow keys.
| Finish | Per | 125 Hz m² | 250 Hz m² | 500 Hz m² | 1 kHz m² | 2 kHz m² | 4 kHz m² | Source |
|---|---|---|---|---|---|---|---|---|
| Concert hall seats Audience, per person seated The page prints the quantity as S alpha-bar (m2) beside the name: an absorption area per person, not a coefficient. | person | 0.23 | 0.37 | 0.44 | 0.45 | 0.45 | 0.45 | Bies 5e Table 6.2, PDF pages 367-369 (printed pp. 338-340) |
| Concert hall seats Audience, per person standing The page prints the quantity as S alpha-bar (m2) beside the name: an absorption area per person, not a coefficient. | person | 0.15 | 0.37 | 0.43 | 0.44 | 0.44 | 0.43 | Bies 5e Table 6.2, PDF pages 367-369 (printed pp. 338-340) |
| Miscellaneous Musician (per person), with instrument The page prints these six figures with no unit. They are held as sabins, square feet of absorption per person: the row is priced per person in a table set in inches and pounds, its figures run from 4.0 to 15.0 where no coefficient of the table passes 1.33, and the row below it names its sabins. | person | 0.3716 | 0.7897 | 1.068 | 1.301 | 1.394 | 1.115 | Long 2e Table 7.1, PDF pages 287-290 (printed pp. 283-286) |
| Miscellaneous Air, Sabins per 1000 cubic feet @ 50% RH | cubic metre of air at 50% RH | 0.002953 | 0.007546 | 0.02362 | Long 2e Table 7.1, PDF pages 287-290 (printed pp. 283-286) |
References
Section titled “References”- Arau-Puchades, H. (1999). ABC de la acústica arquitectónica. Grupo Editorial CEAC. Table 6.1: the source of the rows of the catalogue of absorption coefficients that cite it.
- Bies, D. A., Hansen, C. H., & Howard, C. Q. (2017). Engineering noise control (5th ed.). CRC Press. https://doi.org/10.1201/9781351228152 Table 6.2: the source of the rows of the catalogue of absorption coefficients that cite it.
- Cox, T. J., & D'Antonio, P. (2017). Acoustic absorbers and diffusers: Theory, design and application (3rd ed.). CRC Press. https://doi.org/10.1201/9781315369211 Appendix A: the source of the rows of the catalogue of absorption coefficients that cite it.
- Everest, F. A. (2001). Master handbook of acoustics (4th ed.). McGraw-Hill. The appendix of absorption coefficients: the source of the rows of the catalogue of absorption coefficients that cite it.
- Long, M. (2014). Architectural acoustics (2nd ed.). Academic Press. https://doi.org/10.1016/C2012-0-03257-5 Table 7.1: the source of the rows of the catalogue of absorption coefficients that cite it.