Catalogue of plateau-method constants
Key references: Norton & Karczub 2003
Each catalogue has a page of its own: choose another one here and open it, or narrow the rows of this one by name and by the table that printed them.
The three numbers the plateau method needs to sketch a single panel’s transmission loss without solving the plate model: the mass one millimetre of the material brings, how high the plateau sits, and how wide it is in frequency. The first is a density in disguise, kilograms per square metre per millimetre, which is the density divided by a thousand; it is kept in that unit because that is the unit the method uses it in. The second is a transmission loss, the level the method draws as a horizontal line over the coincidence region, and it depends on the material and not on the thickness. These are the numbers the library’s own plateau-method prediction reads, and it takes a row of this table, or a row of your own, as its material. The measured insulation of real constructions is in the transmission loss catalogue.
Italic is a value this library worked out; a dotted underline is a cell that is not a plain number, and what it is reads on the cell; an asterisk is a note the page made about the row. Click a mark to read it, or give the table focus and press Enter to walk the marks with the arrow keys.
| Material | Surface density per mm kg/m² per mm | Coincidence height dB | Plateau frequency ratio B/A | Source |
|---|---|---|---|---|
| Aluminium | 2.66 | 29 | 11 | Norton & Karczub 2e Table 3.1, PDF page 261 (printed p. 241) |
| Brick | 2.1 | 37 | 4.5 | Norton & Karczub 2e Table 3.1, PDF page 261 (printed p. 241) |
| Concrete | 2.28 | 38 | 4.5 | Norton & Karczub 2e Table 3.1, PDF page 261 (printed p. 241) |
| Glass | 2.47 | 27 | 10 | Norton & Karczub 2e Table 3.1, PDF page 261 (printed p. 241) |
| Lead | 11.2 | 56 | 4 | Norton & Karczub 2e Table 3.1, PDF page 261 (printed p. 241) |
| Plaster | 1.71 | 30 | 8 | Norton & Karczub 2e Table 3.1, PDF page 261 (printed p. 241) |
| Plywood | 0.57 | 19 | 6.5 | Norton & Karczub 2e Table 3.1, PDF page 261 (printed p. 241) |
| Steel | 7.6 | 40 | 11 | Norton & Karczub 2e Table 3.1, PDF page 261 (printed p. 241) |
References
Section titled “References”- Norton, M. P., & Karczub, D. G. (2003). Fundamentals of noise and vibration analysis for engineers (2nd ed.). Cambridge University Press. https://doi.org/10.1017/CBO9781139163927 Table 3.1: the source of the rows of the catalogue of plateau-method constants that cite it.