Skip to content

Catalogue of dynamic moduli of resilient materials

Key references: Vigran 2008

The modulus a resilient layer springs with, for six materials a floating floor is laid on: glass wool, two rock wools, polystyrene foam, polyurethane foam and cork. A layer’s dynamic stiffness per unit area is this modulus divided by its thickness, so these rows give the stiffness of any thickness where the resilient layers give it for one. Every modulus is printed as a range and measured under a static load of about 2 kPa, and the load matters: the same page says rock wool is about 20 per cent softer at 1 kPa and 30 per cent stiffer at 4.

Italic is a value this library worked out; a dotted underline is a cell that is not a plain number, and what it is reads on the cell; an asterisk is a note the page made about the row. Click a mark to read it, or give the table focus and press Enter to walk the marks with the arrow keys.

MaterialDynamic modulus MPaDensity kg/m³Static load kPaSource
Glass wool0.11 to 0.131252Vigran (2008) Table 8.3, PDF page 339 (printed p. 318)
Rock wool0.27 to 0.33150 to 1752Vigran (2008) Table 8.3, PDF page 339 (printed p. 318)
Rock wool0.25 to 0.3110 to 1352Vigran (2008) Table 8.3, PDF page 339 (printed p. 318)
Polystyrene foam0.3 to 310 to 202Vigran (2008) Table 8.3, PDF page 339 (printed p. 318)
Polyurethane foam7 to 1933 to 722Vigran (2008) Table 8.3, PDF page 339 (printed p. 318)
Cork10 to 30120 to 2502Vigran (2008) Table 8.3, PDF page 339 (printed p. 318)

  • Vigran, T. E. (2008). Building acoustics. CRC Press. https://doi.org/10.1201/9781482266016 Table 8.3: the source of the rows of the catalogue of dynamic moduli of resilient materials that cite it.