# Catalogue of orthotropic wood

> One page of the phonometry documentation, as Markdown. Index: https://docs.jmrp.io/phonometry/llms.txt

Canonical: https://docs.jmrp.io/phonometry/reference/catalogues/orthotropic-wood/
Language: en
Alternate: https://docs.jmrp.io/phonometry/es/reference/catalogues/orthotropic-wood/index.md
Version: phonometry 4.0.0
Install: pip install "phonometry[full]"
Author: José Manuel Requena Plens (https://orcid.org/0000-0003-1250-6212)
Published: 2026-10-28
Updated: 2026-11-16T21:36:14Z
Summary: The four elastic constants of a thin orthotropic plate for the two woods a stringed instrument is made of, with the author's own guesses marked.

---

Every solid in the [solids catalogue](https://docs.jmrp.io/phonometry/reference/catalogues/solids/)
is isotropic: one Young's modulus, one Poisson ratio, and the same answer
whichever way a wave runs through it. Wood is not. A spruce plate is thirteen
times stiffer along the grain than across it, and an instrument maker chooses
the wood precisely for that difference, so a single modulus for it describes no
direction at all. These two woods, the ones a stringed instrument is made of,
carry the four elastic constants of a thin orthotropic plate: D1 along the
grain, D3 across it, D2 the coupling between the two directions and D4 the
twisting stiffness. Each is a modulus divided by twelve or a third of the shear
modulus rather than a modulus itself, so they do not compare with the fir and
spruce in the solids table. The page prints the woods as its columns and this
table turns it so that a wood is a row. Two of maple's constants are the
author's own guesses, which the page marks and the table shows, and maple's
printed scaling factor does not follow from its own row, which is registered in
this project's errata.

Each value is the number its page prints, unless a word in brackets after it says what else it is:

- **estimated**: the page marks it as an estimate, not a measurement

A note mark after a name or a value points to the note the page makes about that row or cell, listed under the table.

| Material | Density (kg/m³) | D1, along the grain (GPa) | D2, coupling (MPa) | D3, across the grain (MPa) | D4, twisting (MPa) | Relative scaling factor | Source |
| --- | --- | --- | --- | --- | --- | --- | --- |
| Spruce | 420 | 1.1 | 67 | 84 | 230 | 1.9 | Rossing (2014) Table 15.5, PDF page 632 (printed p. 622) |
| Maple[^orthotropicWood-1] | 650 | 0.86 | 140 (estimated) | 170 | 230 (estimated) | 1.4 | Rossing (2014) Table 15.5, PDF page 632 (printed p. 622) |

[^orthotropicWood-1]: Two of this row's four plate constants, D2 and D4, carry the table's asterisk, which the caption explains as “intelligent guesses in the absence of experimental data”: they are the author's estimates and not measurements. They are served, because the page prints them as numbers, but they are marked as estimates so that a caller who wants measurements can tell them apart. The relative scaling factor the page prints for maple, 1.4, does not follow from this row: the same row prints the relation as the fourth root of D1 over D3, and maple's D1 of 860 MPa and D3 of 170 MPa, neither of them asterisked, give 1.50. Spruce's 1.9 does follow from its own row. The factor is served as printed and the defect is registered in docs/ERRATA.md under “Rossing (2014), Table 15.5”.

## References

- **Rossing, T. D. (Ed.). (2014).** *Springer handbook of acoustics* (2nd ed.). Springer. https://doi.org/10.1007/978-1-4939-0755-7
  Table 15.5: the source of the rows of the catalogue of orthotropic wood that cite it.
