Errata in ISO/PAS 20065
This is the entry of the errata registry on ISO/PAS 20065:2016. The registry’s introduction says how each claim is checked against the printed page and what the status of an entry means.
ISO/PAS 20065:2016, clause 5.3.4 (edge steepness of a distinct tone)
Section titled “ISO/PAS 20065:2016, clause 5.3.4 (edge steepness of a distinct tone)”- Location: clause 5.3.4, Formulae (10)/(11) (printed p. 9), the minimum edge steepness of a distinct tone.
- The print: the two edges are scaled differently: and .
- The problem: the parent standard DIN 45681:2005-03 prints
on both edges (Gleichungen (10)/(11), printed p. 14), and its executable
Anhang J reference program does the same (
Frequenz(i)/Sqr(2)). The two prints cannot both be satisfied. Neither ISO factor is the DIN one: on the lower edge , so the ISO print returns a level difference smaller and is therefore stricter; on the upper edge the divisor is absent altogether, so the ISO print returns larger and is more lenient. An earlier revision of this entry had the two directions the other way round and described the upper edge as “halved”, where in fact the divisor is missing rather than halved. Borderline tones with one-sided edge steepness between and flip classification between the two readings. - Evidence: side-by-side comparison of the ISO print, the DIN 45681 print
and the DIN Anhang J program. The DIN radicals are exactly the case the page
rule exists for:
pdftotextdrops the√glyph from both DIN formulae, so the extracted text readsf_T/2and matches the ISO print, while the page itself readsf_T/√2. Verified on PDF page 13 (printed p. 9) of ISO/PAS 20065:2016 and PDF page 14 (printed p. 14) of DIN 45681:2005-03. - Library behaviour: follows the DIN/ reading (it matches the
only executable reference), with the choice recorded in
_tone_audibility.py. - Status: unreported.
Created and maintained by José Manuel Requena PlensORCIDAbout the maintainerRelease notesChangelogAll projects