# Errata in ISO 7235

> One page of the phonometry documentation, as Markdown. Index: https://docs.jmrp.io/phonometry/llms.txt

Canonical: https://docs.jmrp.io/phonometry/reference/errata/iso-7235/
Language: en
Alternate: https://docs.jmrp.io/phonometry/es/reference/errata/iso-7235/index.md
Version: phonometry 4.0.0
Install: pip install "phonometry[full]"
Author: José Manuel Requena Plens (https://orcid.org/0000-0003-1250-6212)
Published: 2026-10-28
Updated: 2026-10-28T03:12:25Z
License: MIT (https://github.com/jmrplens/phonometry/blob/main/LICENSE)
Summary: Errata in ISO 7235: 1 defect in the printed text, with the evidence and what phonometry does about it.

---

This is the entry of the [errata registry](https://docs.jmrp.io/phonometry/reference/errata/) on ISO 7235:2003. The registry's introduction says how each claim is checked against the printed page and what the status of an entry means.

## ISO 7235:2003, Table 6 (the 160 Hz band belongs to no row)

- **Location:** Clause 6.2.1, Table 6, "Maximum level differences for three
  microphone positions in the test duct", on printed folio 23 (PDF page 33) of
  BS EN ISO 7235:2009.
- **The print:** the frequency column reads 50, 63, 80, 100, 125 and then
  "$> 160$", with 10, 10, 8, 8, 7 and 6 dB beside them. The header of that
  column is "Frequency / Hz".
- **The problem:** the last row is strictly greater than 160, so the 160 Hz
  one-third octave is covered by no row and the table sets it no limit at all.
  Every other row names a single band centre, and 160 Hz is a
  one-third-octave centre of the same series, so the gap is between the rows
  rather than in the frequencies the clause measures over: 6.1 measures every
  one-third octave from 50 Hz to 10 kHz, 160 Hz included. The intended
  reading is "160 and above" or "$\geq 160$", which is also the only reading
  under which the six rows partition the range.
- **Consequence:** the rule the table serves is the one that sends a test duct
  from three microphone positions to five (6.2.1). Read literally, a
  laboratory measuring the 160 Hz band has no criterion to apply and could
  keep three positions whatever the spread between them. Read as intended, the
  limit there is 6 dB.
- **Evidence:** the six rows as printed, read on the page. Verified on PDF
  page 33 (printed p. 23) of BS EN ISO 7235:2009, which endorses ISO 7235:2003
  without modification: the last cell of the frequency column carries the
  strict inequality sign and no equals bar, and the five rows above it carry
  bare numbers.
- **Library behaviour:**
  [`microphone_spread_limit`](https://github.com/jmrplens/phonometry/blob/main/src/phonometry/noise_control/silencer_measurement.py)
  returns 6 dB from 160 Hz upwards, and the conformance row "Microphone
  position spread limits (Table 6)" records the last row as "160 Hz and
  above". A test named for the gap pins the value at 160 Hz itself.
- **Status:** unreported.
